Ford Power Stroke Nation banner

1 - 6 of 6 Posts

·
NObama
Joined
·
189 Posts
Discussion Starter #1
maybe I'm retarded with the search button but couldn't find it... how many quarts of LV do I need to get for a tranny filter change in my 5R110W? I know dry capacity is 17.5, just don't know change amount. Thanks guys
 

·
NObama
Joined
·
189 Posts
Discussion Starter #4
I guess ask a stupid question get a stupid answer there... Just did not want to buy 18 quarts and have to bother with returning a bunch. And I will make sure to check the dipstick thanks for the heads up monster :blah:
Thanks eric
 

·
PSN Veteran
Joined
·
759 Posts
or you can buy that much and just have extras for the next change
 

·
Registered
Joined
·
5 Posts
here is a cut paste from one of my posts on another forum.

Service manual says 7.1 L or 7.5 qts. for drain and refill. Torque drain pan plug to 20 Nm or 177 lb-in. Then check dipstick at normal operating temperature and add in increments of .24L or 1/2 pint till proper level in the cross hatch area of dip stick.

I measure what I drain; it is always 8 qts.

Motorcraft® MERCON® LV Automatic Transmission Fluid
XT-10-QLV; original spec was the SP


Bob
 
1 - 6 of 6 Posts
Top