Ford Power Stroke Nation banner

1 - 13 of 13 Posts

·
Registered
Joined
·
817 Posts
Please tell us more about your needs and truck specifics, then we can offer better advice.

The "quick and dirty" power would be to do a DIY open air intake (search for DIY Intake on this forum), aftermarket downpipe, and straight-piped exhaust. You will also need gauges, at least a pyro, and if you have an auto trans then add a trans temp. Next I would try to find a used 4-position or 6-position chip, and send it to one of the many tuners for some tunes specific to your truck. If you have an auto trans, I would also do some basic valve body modifications. Dale at Tymar Perfomance in Spokane set me up with the valve body mods, parts were less than $100 when I did them 5 years ago.

Regards,
Michael Pliska
 

·
Registered
Joined
·
817 Posts
Aside from the guy above, I see plenty of chips up for sale in the classifieds of this forum as well as others.
 

·
Registered
Joined
·
38 Posts
for cheap power i went with the rosewood DIY stage 1 injector kit, for under 300 bucks and a weekend in the driveway... it was worth it! oh and Ill sell my bullydog 6 position also
 
1 - 13 of 13 Posts
Top