Ford Power Stroke Nation banner
1 - 6 of 6 Posts

· Registered
Joined
·
2,872 Posts
Discussion Starter · #1 ·
I have a set of 450 springs available for my taking if I want them. Will they fit my f250 when I do the D60 swap? I know the ride would be rough but was just curious. This would be front and rear springs.
 

· Registered
Joined
·
2,872 Posts
Discussion Starter · #3 ·
F superduty I guess then. It is a 97 f xxx the guy called it 450
 

· Registered
Joined
·
2,872 Posts
Discussion Starter · #5 ·
I have 350 springs but these have such a nicer arch I am thinkin about at least trying them with removing a couple leafs.
 

· Registered
Joined
·
2,872 Posts
Discussion Starter · #8 ·
There are only 2 leafs. You cant remove any
Not removing leafs from the 350 rather the F-superduty spring pack. There were like 6 leafs.
 

· Registered
Joined
·
2,872 Posts
Discussion Starter · #10 ·
Are we talking front or rear springs?
Both. the rear springs have 5 or 6 leafs plus a bolted on over load spring pack with 3 leafs and then the front has quite a few, 6 may have been an over statement but there were at least 4.
 

· Registered
Joined
·
2,872 Posts
Discussion Starter · #12 ·
The rear will have 8-10 w mutiple over add a leafs. The front will only have 2 leafs.

i run rear F-superduty springs in my pulling truck. They are the 8 leaf ones and i have them clamped, SURPRISINGLY they ride quite well
I'll get pics Monday.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top