Joined
·
2,078 Posts
Whats needed to take apart the front hubs on a 2007 SD 4x4, I thought I seen that there is a "special vacuum tool" and you should always change the o rings. The axle u joints need to be replaced Thanks
F250 4x4 hubs
1 - 3 of 3 Posts
Whats needed to take apart the front hubs on a 2007 SD 4x4, I thought I seen that there is a "special vacuum tool" and you should always change the o rings. The axle u joints need to be replaced Thanks
Joined
·
2,078 Posts
well, looking at this F250 it is an XL and has manual hubs, I see the port on the knuckle for the vacuum line on trucks with automatic hubs. I see a special tool will be needed to seat the axle seal, looks like OTC makes what I need
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
99-07? LED switch upgrade
1999-2010 Super Duty General AftermarketBeen a few years since I was on here last but I've been making money on the side doing GM cluster rebuilds and led switch installs like no other and got to thinking I've never seen anything like that for super duty. So couple weeks ago, I got bored and said screw it and tore some of my switches...- 0
- 120
-
Jgreene1998 · updated
-
Jamo F002 00-03 Ford 7.3L Powerstroke 4" exhaust problems - won't hang right - FIXED!
1999-2010 Super Duty General AftermarketIt's said a picture paints a thousand words, so I hope I can explain this issue logically. It seems to have not-enough hanger clamps - I have one isolation mount without anything to mount to it. The one hanger clamp I have is too short. If I insert the hanger all the way into the isolation...- 20
- 790
-
Jax · updated
-
2000 f350 rebuild!
1999-2010 Super Duty General AftermarketSo blew the clutches in my transmission due to a failed front seal. While it’s parked I would like to do some things to it but need help! Right now I’m running a 4” lift in the back and 3” lift in the front. It is a 2wd but I would like to find a way to get 6” out of the front of my truck. It’s...- 1
- 163
-
Mikle95 · updated
-
05+ Brake Upgrades
1999-2010 Super Duty General AftermarketHey Guys, so a few of you might know that I recently purchased a 2008 Dana 60 out of a truck to swap into "Shamu", my OBS. Well, I would never think twice about driving on used brakes, so I want to buy all new calipers, rotors and pads. But I got to thinking, could I upgrade them at the same...- 6
- 385
-
Lt.Dan · updated
-
Platinum Visor Replacements? PLEASE HELP!
1999-2010 Super Duty General AftermarketIf you guys know anything about the Platinum windshield visor, please reply to this. I was wondering if there is replacement light housings that instead of amber are clear. I dont want to lose the visor because IMO i think the visor is what makes a platinum a platinum.- 34
- 16K
-
mallardslayer07 · updated
Join now to ask and comment!