Ford Power Stroke Nation banner

1 - 20 of 97 Posts

·
Registered
Joined
·
1,856 Posts
Discussion Starter #1
Well, after finally getting all the parts together, I have started putting the engine back together again...
Must say the biggest PITA was finding a front cover with the correct pump size, and water inlet position...ended up buying a new one.

Quick rundown of the parts going in this time include:

-Low compression pistons, with valve notches, and ceramic coatings. (Balanced)
-Cunningham rods were checked over. (Still Perfect, and balanced.)
-Crank was just polished again. (Balanced.)
-Performance cam from Trusted Performance, built by Colt Cams exclusively for Trusted Performance.
-Block was punched out 0.020"
-New injectors from Trusted Performance.
-New "Adrenaline" HPOP from Bob Riley.
-New '04 style wavey oil rails to replace the old '03 straight rails.
-New rocker boxes, valve covers, and branch tubes from '04
-Heads have Beehive Springs, hardened seats, brass lliners in guides, and back cut all valves along with the multi-angle valve job.
-New H-11 headstuds.
-New Billet Low Pressure Oil gear set from Elite Diesel Engineering.
-New EGR delete kit for the bottom of the manifold. All Stainless.
-New EGR valve delete plug. (Thanks Tyler!)
-Ceramic coated exhaust manifolds, up-pipe, and "Y" pipe.
-CFM+ Intake elbow for the water injection.
-Snow Performance Stage 3 MPG Max water injection with 7 gallon res.

....and a sweet set of 18" X 10" Mazzi Hulks with 325/60 R18 Toyo A/T's.

...anyone wanna guess what I'm doing this long weekend?:D
 

·
AllYourBaseAreBelongToUs
Joined
·
13,954 Posts
-Performance cam from Trusted Performance, built by Colt Cams exclusively for Trusted Performance.
-New injectors from Trusted Performance.

:lookaround::lookaround::lookaround:



-New "Adrenaline" HPOP from Bob Riley.

I am curious to see how well this works though (if your "trusty" injectors work). I plan on heading down there eventually to see what Bob can come up with for my truck.

I thought you had canceled your build? Got everything worked out?

.
 

·
Registered
Joined
·
321 Posts
"With this said...I'm about done with all these forums for awhile......."

Back on the forums already that was fast. :popcorn:
 

·
Registered
Joined
·
654 Posts
Sounds like fun man. Wish I had the cash for that hpop set up I looked at it at TS with the exturnal steal braded line very nice. Good luck keep us posted with your progress
 

·
The Unseen Mod
Joined
·
4,126 Posts
Haha looks like my part list minus a few things.
 

·
Attention Whore
Joined
·
5,183 Posts
The liberal use of Trusted parts kinda explains the call out thread for the other day huh?
Good luck with the build...you may need it.
 

·
Premium Member
Joined
·
3,402 Posts
Sometimes people just have to pi$$ on the electric fence to prove a point.....
 

·
WINNING
Joined
·
1,325 Posts
ive seen trusted injectors before no very impressive
no trusted turbo to go with this TRUSTED SETUP LMAO
He already has a trusted 64mm turbo. I have seen Trusted's turbo and injector set up run and they run pretty well. I find it funny that you are a newb and are already bashing on other people. You mind sharing where you saw the trusted injectors?

-French
 

·
Registered
Joined
·
5,891 Posts
He already has a trusted 64mm turbo. I have seen Trusted's turbo and injector set up run and they run pretty well. I find it funny that you are a newb and are already bashing on other people. You mind sharing where you saw the trusted injectors?

-French
he is from TDG and is an avid RCD supporter FWIW
 

·
Registered
Joined
·
293 Posts
Good luck Ivan!!

Keep me posted with some ET slips:tree:
 

·
Registered
Joined
·
1,856 Posts
Discussion Starter #15
Some pictures of the MAHLE pistons & Cunningham rods, pictures showing the difference between the stock connecting rods and aftermarket units, and the ceramic coated manifolds, up pipe, and "Y" pipe.
 

Attachments

·
Banned
Joined
·
844 Posts
Wish i could do this to my truck. All my money is going towards education...Good luck! Looks like a fun build.
 

·
The Unseen Mod
Joined
·
4,126 Posts
Looks good Ivan, you better out post me on pics LOL.
 

·
Registered
Joined
·
263 Posts
looks freakn sweet dude. Tryn to find a motor to put on a stand and tear it down and do this to it.
 
1 - 20 of 97 Posts
Top