Ford Power Stroke Nation banner
1 - 14 of 14 Posts

·
Registered
Joined
·
146 Posts
Discussion Starter · #1 ·
Would 5inch be any different than 4inch power wise or sound wise? Also are there any reasonably cheap mods I can do to my truck like around $500-$600
 

·
Registered
Joined
·
6,652 Posts
5" is louder, 4" has nicer rumble to me JMHO though.

5" won't add any more power. 4 is plenty.

You could rough up a nitrous kit for 5-600 :D
 

·
HP Junky
Joined
·
4,927 Posts
5" won't give you any more power, it will be a deeper tone and a bit louder. But no more power, in fact, i've heard you lose a little bottom end torque with the bigger exhaust.
 

·
AllYourBaseAreBelongToUs
Joined
·
13,952 Posts

·
Registered
Joined
·
2,085 Posts
diff doesn't have a clutch or conveter :D:poke:
 

·
Registered
Joined
·
6,652 Posts
lmao

All's I know is they both take the power from your spinny thing and put it to the other spinny thing which transfers it through the spinny thing bolted to it and there's another spinny thing bolted to that which transfers it through a spinny thing shaft connected by these little 4 way spinny things then into the spinny thing in your rear then it makes your spinny things what touch the road start smokin :shrug:

:D
 

·
Village Idiot
Joined
·
8,209 Posts
rpm outlet has some cheap 4 &5" pipes

I need better spiny thingies,
when i push the flat thingy on my truck,
it don't go very fast
 

·
AllYourBaseAreBelongToUs
Joined
·
13,952 Posts
I don't know that I'd do it without head studs. I'd talk to your tuner first and see what he thinks. He may be able to make you a nitrous specific tune that'll be safe for your truck.
 

·
Village Idiot
Joined
·
8,209 Posts
kinda like when you ran the snow white tunes on your old motor danny?
 
1 - 14 of 14 Posts
Top