[jason95]

Hey guys I have 95 psd and I'm having problems. After the truck cranks it shows a check engine light. While the light is on it idles smoothly, when the light turns off(30 sec or so) it dies. I crank it back up and hold the rpm's about 2k when the check engine light shuts off I bring it back to idle and it runs rough. I replaced the cps and the gpr but nothing changed. Any ideas would be greatly appreciated, thanks

 

[speeddemon31176]

You need to put a scanner on it. You have codes that need to be read. Then you can fix the problem from there. You need to post up where you are from so that other members can know whether or not they are near you to lend a hand.