Ford Power Stroke Nation banner

1 - 8 of 8 Posts

·
Registered
Joined
·
37 Posts
Discussion Starter #1
My Edge CTS does not always come on after start-up. About 2 out of 10 times I have to unplug it and plug it back it to get it to display. Anyone have any ideas why?
 

·
Administrator
Joined
·
32,965 Posts
mine does it every great once in a while ,,
maybe try updating it? or call Edge they are always helpful
 

·
Registered
Joined
·
620 Posts
Check the connection on the back of the monitor.
 

·
Registered
Joined
·
37 Posts
Discussion Starter #5
Thanks for the suggestions.

So far I have called Edge and the tech said it might be a low voltage problem when the truck is being started causing the Edge to shut down.

I have a voltage meter feature on my radar dectector and it is running 13.7 to 14.0 volts right after start up. My batteries are only a couple of years old and it cranks over great. I will have to get the batteries tested to be sure that they are good.

I will also try tapping the screen and wiggling the connector.

Thanks Again......
 

·
Registered
Joined
·
94 Posts
Some guys on the dmax forums are having the same issue.No problems so far with mine tho.
 

·
Registered
Joined
·
620 Posts
Thanks alot! Mine did this over the weekend......
 

·
Registered
Joined
·
37 Posts
Discussion Starter #8
I added Fuel Pressure to mine and did an update. The update was for 03's and 04's. Mine is an 04 and so far it is fixed.
 
1 - 8 of 8 Posts
Top