Ford Power Stroke Nation banner

1 - 1 of 1 Posts

·
Registered
Joined
·
26 Posts
Discussion Starter #1
I cleaned my ebps and tube the other day and in the process of pulling the tube off had a slight problem. After soaking the manifold side of tube with pb blaster and lots of cussing, finally got the nut on the tube to turn. After I pulled the tube out I noticed that I was missing some threads on reducer from the manifold down to the tube. there is only about 2 maybe 3 good threads holding things on. Any good ideas to get that adapter out so I can put a new one in?

I was thinking more pb blaster overnight, heat and cool the adapter and then try to get it out without having to replace the manifold.
 
1 - 1 of 1 Posts
Top