Ford Power Stroke Nation banner
1 - 5 of 5 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter · #1 ·
Ive tried searching the forum and the internet and I cant seem to find what the normal ebp should be.. Also when one refers to wot does that mean the reading should be taken with the go pedal to the floor any help would be appreciated right now running 70mph on a flat road Im hitting almost 30 for ebp just seems a little high to me truck is all stock except for whats needed to make it reliable dummy plugs stc things of that nature I am running the street tune from sct
 

·
Premium Member
Joined
·
3,413 Posts
At idle I see 2-3PSI, mostly 2PSI for EBP. You need to understand how your monitoring device reads pressure. Some will include atmospheric into the value, so you could see 16+PSI at idle. Look at the following: BARO, MAP, BOOST, EBP and you will see what I'm discussing.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top