Ford Power Stroke Nation banner

1 - 5 of 5 Posts

·
Registered
Joined
·
1,013 Posts
Discussion Starter #1
what are the diffrence between the 2 and would they both be able to be put into a 7.3 with good results? with proper mods? the dt466e is inj code ba and the 530 is code bn
 

·
Registered
Joined
·
1,013 Posts
Discussion Starter #3
what about code bn code injectors? i didnt find nothing about them in that post
 

·
HRT Performance
Joined
·
4,565 Posts
what about code bn code injectors? i didnt find nothing about them in that post
BN injectors use a stainless steel compression gasket instead of the copper found on most HEUI injectors. This was because they changed the injector cup in the head from a brass to a stainless steel for some applications. I do not know any other specifics other than the stainless steel gasket is to be used with the stainless steel cups.
 

·
Registered
Joined
·
1,206 Posts
what about code bn code injectors? i didnt find nothing about them in that post
You may have missed it... It was the last line in the post.

EF, BG, BI, BJ, BN and BP injectors all have basicly the same capacity and are split shots. However the nozzles vary on them depending on application. They can be found in many DT466s and I530Es.
 
1 - 5 of 5 Posts
Top