Ford Power Stroke Nation banner

1 - 8 of 8 Posts

·
PMS medication required
Joined
·
453 Posts
Discussion Starter #1
Anyone have a photo showing the differences between the 94.5-96 valve covers and the 97 covers? I've heard that the design was changed to help with the injector noise and wanted to see what the difference is. I'm always looking for ways to quiet the engine that won't decrease HP.
 

·
Registered
Joined
·
542 Posts
The early valve covers are a simple metal cover. The newer style are a sandwich there is 2 layers of metal with a rubber layer in the middle.
 

·
PMS medication required
Joined
·
453 Posts
Discussion Starter #3
Know a good place for aftermarket covers? PSD engines don't make it to the pick-a-part places around here.

The early valve covers are a simple metal cover. The newer style are a sandwich there is 2 layers of metal with a rubber layer in the middle.
 

·
Registered
Joined
·
542 Posts

·
PMS medication required
Joined
·
453 Posts
Discussion Starter #7
A set of covers from a 99 should fit a 96 right?
 

·
2010 BOB Points Runner up
Joined
·
2,300 Posts
Yes all 7.3 valve covers are interchangeable. The thinner '94.5-'95 covers had the same size holes just the heads of the bolts were smaller

-Michael
 
1 - 8 of 8 Posts
Top