Ford Power Stroke Nation banner

1 - 7 of 7 Posts

·
BRING DA AMBALAMPS
Joined
·
1,952 Posts
Discussion Starter #1
I've taken my badges off so now i'm looking for some help on how to get that black sticky crap off. Also, should i just use some type of bondo to fill the holes? thanks!
 

·
Registered
Joined
·
2,081 Posts
If you have bondo in a place where air can get behind it, it will crack and not work good. Usually you need to weld the holes and sand them down, then use bondo to make smooth or just lots of layers of paint. Just the way I would go about it. But I'm not a pro either.
 

·
Offical Puddle Displacer
Joined
·
2,339 Posts
fiberglass would work good but welding would be ideal. do not use only filler it will crack pretty quickly and youll be doing it again
 

·
BRING DA AMBALAMPS
Joined
·
1,952 Posts
Discussion Starter #4
any ideas what a shop would charge to do that?
 

·
7.3
Joined
·
150 Posts
Weld the holes up, fiberglass, bondo, skim putty. That's how I did mine.

 

·
<-MONEY PITT!!
Joined
·
1,308 Posts
Weld the holes up, fiberglass, bondo, skim putty. That's how I did mine.
:whs: And to get the tape/sticky off from behind the badge use a drill and the stripe eraser.
 
1 - 7 of 7 Posts
Top