Ford Power Stroke Nation banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
The other night drove home truck ran fine. Next morning i start it and it runs very ruff then dies and no start. I have driven diesel fuel bowl delete setting here so i start by installing it and make sure I’m getting good fuel pressure. I’m not so i put new fuel pump on. Still won’t run. Icp is bad i change it. Then i change the ipr. Try a different pcm. Last thing was change calve cover gaskets one was bad. Now it runs kind of i can drive it but it has no power will barely pull its self up a hill. I can floor it while driving and nothing setting in my driveway in park and floor it it will rev decently but still ruff. I tried a good idm no change. I’m lost as what to do next. Maybe start checking grounds?
 

·
Registered
Joined
·
3,398 Posts
You never did anything with the cam sensor? that would be the first suspect

Do you have a wait to start light?
Check your fuses?

This is a 7.3 Excursion how many miles?
 

·
Professional American, guarding our constitution.
Joined
·
9,453 Posts
CPS. Turn the wipers on and see if it gets more chaotic, then it's definitely your culprit.
 
1 - 3 of 3 Posts
Top