Ford Power Stroke Nation banner

1 - 16 of 16 Posts

·
Registered
Joined
·
399 Posts
Discussion Starter #1
I installed a leveling kit on the 06 f350 and id like to know what the correct wheel offset is for a 18*10 wheel that wont stick out more than an inch or so. I was looking at the pacer 184p-8187. 18*10, -25 offset, 4.5 backspacing, 8x170mm bolt circle, 3400lb load rating and 125.56 is the hub bore diameter.
 

·
Registered
Joined
·
2,190 Posts
Stock 18s and 20s are 8" wide with approx 6" of Back Space.

So, even with 6" of Back Space a 18x10 is going to stick out 2" further than the stock wheels.

18x10 with 4.5" Back Space will stick out 3.5" further than stock wheels.
 

·
Registered
Joined
·
399 Posts
Discussion Starter #4
If i found wheels that had 6" of backspace, would anything rub (minus the inner fender) w/ the bds leveling kit and 35 12.50's?

Im trying to figure out what size wheels will fit good on the truck, like what are the usual specs that people run with 18x9 and 18x10?
 

·
6Leaker
Joined
·
6,719 Posts
I have 18x9's with 5" of backspacing and my tires stick out just enough to get things messy but not too much at all. Right on the border of what I like. Mine only rubbed on the factory mudflaps
 

·
Registered
Joined
·
878 Posts
I think they look good both ways on a high lift I like to see em stuck out there. but it sucks if your a show and shine kinda guy. luckly I'm not....
 

·
Registered
Joined
·
2,190 Posts
If i found wheels that had 6" of backspace, would anything rub (minus the inner fender) w/ the bds leveling kit and 35 12.50's?

Im trying to figure out what size wheels will fit good on the truck, like what are the usual specs that people run with 18x9 and 18x10?
35/12.50s should clear....may just kiss the radius arms if anything.

Depends on the look people are after.


This is 10" wide with 4.5" Back Space:
TruckToyz Performance Image Viewer

9" wide with 5.5" Back Space:
TruckToyz Performance Image Viewer
 

·
Registered
Joined
·
399 Posts
Discussion Starter #9
I'd have to see the trucks w/ direct shots on how far the wheels stick out.
 

·
Registered
Joined
·
399 Posts
Discussion Starter #14
what wheels are those?
 

·
Registered
Joined
·
2,190 Posts
If you are asking about mine....Weld Racing Renegades, have not been made in a while now.

Similar build (forged) and 18x8.5 would be Ion Forged Terminators.
 

·
6Leaker
Joined
·
6,719 Posts
these are about the best pics I got of mine to give ya an idea...

18x9 with 5.00" of backspacing and 325/65R18 nitto's



 
1 - 16 of 16 Posts
Top