Ford Power Stroke Nation banner

1 - 5 of 5 Posts

·
Cab on installer
Joined
·
2,150 Posts
Drain coolant down below the upper rad hose connection. Remove upper rad hose. Remove 4 bolts that hold thermostat housing on. Swap thermostats. Reinstall thermostat housing. Install upper rad hose. Fill coolant.
 

·
Cab on installer
Joined
·
2,150 Posts
I didn't. You could loosen it and move it over a bit if needed. My egr is gone so I can't remember if You need it removed.
 
1 - 5 of 5 Posts
Top