Ford Power Stroke Nation banner

1 - 5 of 5 Posts

·
Registered
Joined
·
510 Posts
Discussion Starter #1
My 96 cab looks like it is sagging slightly, body lines do not line up. Seems like the passenger side read of the cab needs to be shimmed. Is this something that has been done or is something else collapsed? Looking under the truck I was surprised how far in the mounts are. Everything looks solid around the mount and on the cab. thanks
 

·
Nose picker
Joined
·
426 Posts
Over time the cab mounts rot/wear out and need replacing. I replaced the rears on my truck and it brought the body lines back into line.
 

·
Registered
Joined
·
635 Posts
Yes you can, the factory does. The real fix would be to buy new poly body mound.
 

·
Registered
Joined
·
510 Posts
Discussion Starter #4
on my jeep its got a bolt, on this i see a nut on a stud. after i pull the nut off, how far does the body need to come so i can replace them?
 

·
Registered
Joined
·
635 Posts
The nut does not come off. You will remove the bolts from inside the cab, then you can lift the body and put a washer in until desired height.
 
1 - 5 of 5 Posts
Top