Can anyone identify this part and where it goes? I think in the oil filter housing but not sure
1 - 10 of 10 Posts
Not sure if it came from this project or not I found it on the bench as I was reassembling everything
Joined
·
6,029 Posts
Looks like the sleeve that goes in the fuel pressure regulator on the secondary fuel bowl. Later models don’t use them though.
I'm not in front of it right now but I believe that is still in there. I could be wrong though
Joined
·
6,029 Posts
You’d have little to no fuel pressure if it was not there. The later models it is built into the fuel bowl.
Joined
·
6,029 Posts
No. Not there. It goes where the brass plunger is with the blue spring. It’s where the return line is bolted up. The adapter is held on with some torx screws.
Ok I'll take that cover back off and look. Thank you!!
Joined
·
6,029 Posts
If you have a later model build you won’t use that piece.
Gotcha. Explains why I didn't see it to pull out. It wasn't there. Thank you
1 - 10 of 10 Posts
