Ford Power Stroke Nation banner

1 - 5 of 5 Posts

·
Registered
Joined
·
17 Posts
Discussion Starter #1
I installed a bd diesel torque convertor and already had a banks trans command on it. I also installed a derale trans pan and a derale filter kit. Ive got a ts chip, and when simply towing a 5-6k trailer it starts to climb up to 220 degrees. that seems really hot because I also own a 01 f350 and that one usually stays at 160-180tops. Wondering if anyone has had similar issues, I'm thinking it might be the trans command having an issue with convertor maybe.
 

·
Trust me, I got this...
Joined
·
1,523 Posts
If that banks thing is easy to disable or remove, I would probably try that real quick first.

Sent from my LM-V350 using Tapatalk
 

·
Registered
Joined
·
3,122 Posts
Did the converter require any pump mods? Some converters do. I second the trans command comment above. Cheers!
 

·
Trust me, I got this...
Joined
·
1,523 Posts
Not forever...it should plateau if its just sitting there idling in park/neutral. Kinda depends on how long its sitting there running but it shouldn't be getting past operating temp, and definitely not overheating if thats what you're after.
 
1 - 5 of 5 Posts
Top