Ford Power Stroke Nation banner

1 - 20 of 20 Posts

·
Registered
Joined
·
860 Posts
Now $2200.
If your not in a hurry for cash, I can talk to you in a few weeks, I should be signign some large contracts with an injector purchase fee included in them.:redspotdance:
 

·
Registered
Joined
·
1,888 Posts
Ok, would you please refresh my memory? I have heard so many references to different injectors. What would be the "B" codes? (Single shot? Or still Splits?)
Ect.. what HP would they get you easily to?

Thanks!
 

·
Edward Scissorhand WanaB
Joined
·
1,995 Posts
single shot inj. and they are make some big hp. 450-500 + is achievable with some more mods
 

·
Don't EFN worry about it
Joined
·
15,588 Posts
That is a good price I am broker than broke at the moment.
 

·
Registered
Joined
·
6,652 Posts
Ok, would you please refresh my memory? I have heard so many references to different injectors. What would be the "B" codes? (Single shot? Or still Splits?)
Ect.. what HP would they get you easily to?

Thanks!
Jim, these are "530" injectors from DT466/530 applications.

Stock B codes flow 250cc I believe and have a 5-hole nozzle.

Slap some EH nozzles on em and you're talking 500hp easy with supporting mods.

With some mods to make the flow more, some are doing 700+
 

·
Don't EFN worry about it
Joined
·
15,588 Posts
Jim, these are "530" injectors from DT466/530 applications.

Stock B codes flow 250cc I believe and have a 5-hole nozzle.

Slap some EH nozzles on em and you're talking 500hp easy with supporting mods.

With some mods to make the flow more, some are doing 700+
Greg they allready have EH nozzles. .0075eh nozzles it is in the post.
 

·
Registered
Joined
·
6,652 Posts
You're right although I was just describing a stock B code to Jim.

Could be confusing though.

Anyway, great buy here. Hope one of you lucky guys gets em
 

·
Don't EFN worry about it
Joined
·
15,588 Posts
You're right although I was just describing a stock B code to Jim.

Could be confusing though.

Anyway, great buy here. Hope one of you lucky guys gets em
I apologize my bad . did not understand you where making referance.
 

·
Harry Callahan
Joined
·
991 Posts
Discussion Starter #14
Thanks for the interest guys, 99% chance they are sold. Still have

heads $150
factory forged rods $200
Hypermax Tapercore $900

miscellaneous parts like flexplate, balancer, oil pan, front cover, valve covers, nuts and bolts,
 

·
Harry Callahan
Joined
·
991 Posts
Discussion Starter #16
Yep, full pair with rocker arms. 115 pounds each, and I will put them on a pallet and drop them at abf freight if you want them.
 

·
Harry Callahan
Joined
·
991 Posts
Discussion Starter #18
Rods are unbroken, best I can say without magnaflux. Sorry all intake spyders are gone.
 
1 - 20 of 20 Posts
Top