[Cat_Rebel]

I can't post up in the IDI forum tonight & I figgure this is more of an obs question anyways. I hooked up to a 16 ft trailer full of empty pallets with my IDI tonight. All of the lights worked just fine when I left. But as soon as I pulled out the ABS light started flashing. I don't think it's the ABS / speed sensor because that makes the OD light flash on & off & the speedo don't work. I kept playing with the brake controler because the trailer has brakes too. I pulled & checked the ABS fuse & it was still fine. Then I discover when I go to turn that my signals & hazzards don't work. I'm thinking turn signal solonoid? But the brakes work just fine even pulling the trailer. On the way home driving without the trailer I also discover that my Cruise Control isn't working either! So I'm not sure where to start on all of this. I unplugged the battries hoping that I might reset some code but I started it back up & it's the same thing. It runs & drives great I just have a flashing yellow light on the dash, no turn signals & no cruise control.
Please tell me it's some thing simple & go ahead & laugh at me!ointlaugh:

 

[mattymx]

You lost the #13 fuse that is under the dash in the fuse panel. Or at least that is what it is in an OBS. it is the top most fuse that runs left to right long ways.

 

[Cat_Rebel]

Okay you guys can laugh at me now...ointlaugh:All it turned out to be was two fuses.:doh:
I couldn't figgure it out so I did what any wise ******* would do...I started pulling fuses till I found a broken one. Well wouldn't you know it but there is a ABS fuse & an ABS sensor with the cruise control fuse. My buddy just looked at the ABS fuse not the other one. As it turns out that one was blown. Then I found the turn signal & hazzard fuse blown as well. So I drove down to Auto Zone & for $2 I picked up 5 or 6 fuses so I now have some spares to carry around.