Ford Power Stroke Nation banner
1 - 12 of 12 Posts

·
Registered
Joined
·
23 Posts
Discussion Starter · #1 ·
does anyone have a set of hard fuel lines, the ones that come off the fuel bowl feed and return WITH the two flex lines behind them. just had to pull my motor for rusted oil pan and they are leaking where hard meets flex lines, anyone with them please let me know i will paypal ASAP!
thanks for looking

mike
most likely a southern truck so same fitting isnt rusted
:bowfast::bowfast::psn::ford:
 

·
Registered
Joined
·
23 Posts
Discussion Starter · #3 ·
new berlin wisconsin 53146
 

·
Busy Busy
Joined
·
9,004 Posts
I would replace with pushlock. If you don't already have hard lines ordered.
 

·
Registered
Joined
·
23 Posts
Discussion Starter · #7 ·
have a fass with pushlock on the rest of truck...can that soft hose take the temps laying on the motor like that?
 

·
Edward Scissorhand WanaB
Joined
·
1,994 Posts
have a fass with pushlock on the rest of truck...can that soft hose take the temps laying on the motor like that?
Aren't several of the Regulated Return Fuel Systems made from Push Loc? Parker Hose has a high temp push loc (836) hose. I had a braided line chafe my main fuel line (hard line) and I replaced it with the Parker 836 from the pump to the fuel bowl.
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top