Ford Power Stroke Nation banner

1 - 13 of 13 Posts

·
<-- it's like that
Joined
·
6,567 Posts
The 6.0L intercooler will bolt in, but you'll need new boots to connect the I/C tubes to the I/C. You'll need one 3x3x8" and one 3x3.25x8" boots, and one new 3" clamp to make it all work.
 

·
Registered
Joined
·
3,940 Posts
Can I jump in here? Will it cause any lag with a stock E99 turbo?
 

·
Registered
Joined
·
648 Posts
no lag. had the little stocker before i switched. no problems. lowered egt by about 75 - 150.
 

·
Registered
Joined
·
3,940 Posts
There's a place that sells the boots for that conversion but I'll have to do some searching. If I find it I'll post it.
 

·
<<< THE GAUGE WHORE...
Joined
·
12,082 Posts
If you dropped 150* with a 6.0 IC swap you had a boost leak...

I saw less then a 50* drop empty, and maybe a 50* drop towing... MAYBE.
 

·
Registered
Joined
·
3,940 Posts
Huh! I'm not doing all that work & spend the money for 50*
 

·
Registered
Joined
·
202 Posts
If you dropped 150* with a 6.0 IC swap you had a boost leak...

I saw less then a 50* drop empty, and maybe a 50* drop towing... MAYBE.


I am in the same boat, so is it even worth doing? Also does it matter stock vs modified motor for any results?
 
1 - 13 of 13 Posts
Top