Ford Power Stroke Nation banner

1 - 7 of 7 Posts

·
Haters Gonna Hate
Joined
·
5,869 Posts
Discussion Starter #1
ARP...
Tighten the head bolts in the following sequence.
Tighten bolts 1 through 10 to 65 lb-ft.
Tighten bolts 1 through 10 to 95 lb-ft.
Tighten bolts 1 through 10 to 135 lb-ft.
Tighten bolts 1 through 10 to 180 lb-ft.
Tighten bolts 1 through 10 to 210 lb-ft.
Tighten bolts 11 through 15 to 24 Nm (18 lb-ft).
Tighten bolts 11 through 15 to 31 Nm (23 lb-ft)



Injector Clam Bolt Torque- 26ft/lb (depending on installer) Elite uses 36ft/lb
 

·
Haters Gonna Hate
Joined
·
5,869 Posts
Discussion Starter #3
Good post
thanks, i need to modify it though, i pulled it off a few different posts from here and compd..... the new torque spec for the arp studs with there superlube is 210ft/lbs


If anyone has anything else to add to this write up please do so, i will have a mod clear the thread out and put all the appropriate info in 1 post and add it to the technical section for assistance to those of us working on our own rigs that need info
 

·
I Just Break Stuff
Joined
·
2,201 Posts
Nice!!!! Ought to save on the repost.
 

·
Big dumb redneck
Joined
·
4,200 Posts
I thought there were only 3 sequences/steps to get to the 210? Why are there now 5 steps?
 
1 - 7 of 7 Posts
Top