Ford Power Stroke Nation banner

1 - 7 of 7 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter #1
Wondering if I can run 20x12 wheels with 35x12.50 toyo mt with heavy duty front suspension and a leveling kit. Also needs pics from side with 12" wide wheels.
 

·
Registered
Joined
·
1,069 Posts
It should work with the leveling kit, you might rub a little on the plastic valance. I have a 2wd I'm running a 325/45/24 which comes out to a 35.5 I have a leveling kit a get a very slight rub on the plastic like I said mine is 2wd it sits lower from the factory
 

·
Registered
Joined
·
151 Posts
It depends on the offset but I'm running Nitto Trail Grapplers 35x12.5 20x9 zero offset Fuel Mavericks with a leveling kit and it barely rubs the radius arm at full turn.

 

·
Registered
Joined
·
27 Posts
Discussion Starter #4
I have 20x9 and 35's now just wandering on 20x12's with 4.75 back spacing
 

·
Registered
Joined
·
319 Posts
My buddy has 35x12.5 on 20x12 -44 off set with a 4" lift....he's got about an inch of clearance from fender to tire.
 

·
Registered
Joined
·
280 Posts
With just a 2.5" lift I doubt you will clear with out some pretty good amount of trimming. I had to trim to clear my 35's and 20x10's so with more negative offset means more trimming
 

·
The Diesel Cartel
Joined
·
1,111 Posts
Yeah this is going to require cutting or removing the bumper brackets, cutting the inner fenders, and possibly even more.

I just did a customers truck with Icon 4.5 and 22x12 American forces on 35" Toyos and it needed a good amount of cutting.
 
1 - 7 of 7 Posts
Top