Ford Power Stroke Nation banner

1 - 20 of 31 Posts

·
WWDD
Joined
·
10,531 Posts
Discussion Starter #1
Im starting a thread to showcase what people have done to there 08-10 superduties as far as suspension lifts/lowering, and wheels and tires

Im going to make this a sticky so KEEP IT ON TRACK!

Ill start off with my old set up

6inch lift 7inch rear block, homemade traction bars 20x10 bmf novicanes 37/13.50/20 TOYO M/Ts sat about 1/2 inch taller in the rear.




Current set up, stock suspension 20x10 BMF novicanes 305/55/20 Nitto terra graplers

 

·
Registered
Joined
·
9,722 Posts
Here is a pic of my old setup. 2.5" leveling kit, 3.25" rear blocks, Bilstein 5100 series shocks, 325/65/20 Toyo Open Country AT (35.2" tall, 12.9" wide), BMF Novakane 20x9 wheels. Absolutely no tire rub on anything with this setup. Truck sits basically level front to back. I really loved the stance and look of my truck, but it just wasn't good at all for racing so I dropped the truck down.



Here is my new setup. Stock height in the front, 1.75" blocks in the rear (basically stock), stock FX4 Rancho shocks up front, Bilstein 5100 series shocks in the rear, Pro Comp traction bars, 305/50/20 Toyo Proxes, same BMF wheels.

 

·
Was PSD0389
Joined
·
2,601 Posts
Ill do my best to explain it all since I bought the truck with all this done.

4" superlift with 5" rear block (i think thats the right size block). 4 link in the front, traction bars built by 97strokn&smokn, dual steering stablilizers, superlift shocks all around, 20x9 Helo Wheels, 35x12.50 Mickey Thompson ATZs, sits about an inch taller in the rear

 

·
Registered
Joined
·
545 Posts
Here is mine, 6 inch 4 link BDS lift and 7 inch blocks out back. Here it is with my 37x13.50x22 BFG km's and 22x10.5 Greg Welds, I want another set of monsters tho. I also need traction bars.


Here it is with the 20x10 Monsters and 37 inch toyo's


Another set of 22s on 37s
 

·
IM OUT!!!
Joined
·
4,548 Posts
current: pro comp stage 2 6" lift with fox shocks all around and duals in the front...37x18x13 toyo open country M/T
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]

new front king coilover suspension to come, hopefully before the end of this year!:D
 

·
Registered
Joined
·
298 Posts
This is all so far, just a 2in procomp lift with mx6 shocks all the way around with procomp dual steering stabilizer in the front, stock rims and Mickey Thompson baja all terrains 35x12.5R20.





 

·
<--Under the Knife Again
Joined
·
1,400 Posts
BDS leveling kit with PMF 3 1/2 inch blocks in the back. 35" toyos on XD series Black Hoss rims.

 

·
6.4 STROKER
Joined
·
59 Posts
Most recent pics of my truck, the vent's are black now:D
and more black goodies are to come
 

Attachments

·
MADE IN KY
Joined
·
19 Posts
I'll play along

mine actually came this way from the dealer, I would have gone with springs and not blocks in the back, might have to swap that in the future
 

Attachments

·
Registered
Joined
·
1,873 Posts
Well here is mine. 8" Pure Performance dessert race kit with King Coil overs at all four corners. 37" Toyos on 20" BMF's Here are some pics taken up at Hetch Hechi last weekend.












 

·
Registered
Joined
·
1,873 Posts
 

·
Registered
Joined
·
57 Posts
Here is my setup:

4.5" Icon Vehicle Dynamics Lift
Icon Dual Steering Stabilizer
35" Toyo Open Country M/T Tires
20"x10" Ultra Predator 8 Wheels







 

·
Registered
Joined
·
12 Posts
Here is my 2009 F250, nothin special! Stock suspension, 33/13.50R20 Mickey Thompson ATZ's, 20" Eagle alloys. I like the look so far





 

·
Registered
Joined
·
3 Posts
Wanted Weld Racing Super Single II 17 x 10 but couldn't find any (no longer in production) but as a substitute I'm awaiting new Centerline Bullet 17 x 9. On the truck are Weld Racing Typoon 17 x 10. Other than a leveling kit stock for now.
DSC_0211.JPG

DSC_0212.JPG

DSC_0213.JPG
 

·
<---new toy
Joined
·
856 Posts
Picture 2 001.jpg

Picture 2 002.jpg

Picture 2 005.jpg

Picture 2 007.jpg

Picture 2 010.jpg

Here is some dually pics since no ones gonna add any! Haven.t had time to change the tires yet. gott'em just ain't had the time...
 

·
Stroken it 7.3,6.0,6.4
Joined
·
1,239 Posts
Well here are some pics of the 450 Lifted
Its got a Icon 4.5 lift with stock 19.5 rims and Running 35.5" Toyo M608Z traction tires and 2 inch wheel spacers about to be turned down to 1 1/2 and next week One Up off road traction/ladder bars are going on.

Day I bought it

How it sits now.









Next to a stock 450

 

·
Registered
Joined
·
1,555 Posts
Here is mine stock


Here it is with 35/13,50/20 on hello 20x9 stock suspension absolutely no rubbing.
 
1 - 20 of 31 Posts
Top