Ford Power Stroke Nation banner

1 - 4 of 4 Posts

·
Registered
Joined
·
504 Posts
Discussion Starter #1
Im thinking about selling my ATS Ported housing and running the stock compressor housing with a 1.0 non wastegated housing with an anti surge wheel. Question is will it make much more difference in EGT's, spool up, etc? Would I be wasting my time and not gain anything? Stock truck with a chip is what I have, possibly a Terminator T1 in the future.
 

·
Registered
Joined
·
3,432 Posts
I wouldn't do it to help with EGT's. I didn't notice much of a difference in spoolup on my dads truck.

I would just run what you got.
 

·
Registered
Joined
·
692 Posts
Leave the ATS housing. Find a wastegated 1.0 exhaust housing, exhaust temps should drop 100-175 deg. Set the wastegate to pop off at 27-28psi. The stock .84 limit is 25psi.
 

·
Wheelie Dude
Joined
·
2,126 Posts
1.0 nonwg will drop egts some and drop drive pressure some. I would keep the ATS housing and do the 1.0 housing since you already have the ATS housing.
 
1 - 4 of 4 Posts
Top