Ford Power Stroke Nation banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. 6.0L Power Stroke Technical Info
    I was driving everything was fine, pulled over to take a call went to start it up again, and it entered limp mode. I replaced the icp sensor, inspected the ipr valve it was good, did a air test, no air leaking, replaced oil filter did an oil change and now scanner is reading no ficm sync, and no...
  2. 1994-1997 Power Stroke Technical Info
    Fellers, Lot of information, tried to cover most questions I might get asked. New to diesels, but have a general understanding on how these trucks operate after owning it and working on it for the past year. I have a 96 7.3 PSD that from what I can tell prrrrs like a kitten on initial start...
  3. New Member Introductions
    Hello. This is my first time posting I believe. Don’t even know if I’m posting in the correct spot so please forgive me if I don’t. Anyway. 2001 7.3 crank no start. Icp only builds to about 200psi and it takes forever while cranking. Ipr starts at 15% with key on engine off then climbs to 65% as...
1-3 of 3 Results
Top