Ford Power Stroke Nation banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. 6.0L Power Stroke Technical Info
    2003 ford 6.0 with a rough idle and injector 6 code. Truck runs amazing but idles rough when in drive at a dead stop and when i throw it in park it revs up to 900rpms then drops to 500. I changed the icp because it threw a code and it was leaking. New icp and it started giving injector 6 code...
  2. New Member Introductions
    01 F250 stock 7.3 high mileage No Check Engine Light On Had rough idle - replaced ICP & Cam Position Sensor. Idles perfect. Sounds great. No smoke. New glow plugs and new Under Valve Cover Gasket and wiring connections. -- Intermittent brief cut out or skips at random speeds above 40mph...
  3. 7.3L Power Stroke Technical Info
    Hey fellas new to the nation and need some info/advice. I have a 2000 f350 7.3 4x4 with a built automatic. I was wondering if the sensors from a 96 MY 7.3l would swap over and be usable on my 2000? Parts in question are icp, ipr, cps, and cts. My brother's 96 has all new oem motorcraft ones in...
  4. 7.3L Power Stroke Technical Info
    New Here. Hope the experts can help. Two days ago I was driving down the highway when my truck felt like it lost power. I pulled off the road, it was barely running, sounded like it was not getting air or fuel. I immediately got check engine light, I'm unable to get the code currently. (I'm...
  5. 7.3L Power Stroke Technical Info
    2000 f250 7.3l, my Hpop lines blew and replaced them and icp sensor, filled the fuel bowl. Had to do the gas trick to get it to start it went about 2 miles fine then lost all power. Towed it home and took the icp sensor out to see if it would shoot oil out and it did replaced the ipr valve...
1-5 of 5 Results
Top