Ford Power Stroke Nation banner

f350

  1. 7.3L Power Stroke Technical Info
    Howdy guys! I have a few questions regarding this new rig I purchased! Its a 1997 F350 4x4 ambulance I want to convert into a camper with 120000 miles on it. It runs pretty tight but has some issues. I really dont know much about this engine or car and I was hoping you guys could help me out or...
  2. [7.3L - Technical Info]
    Well I decided to get a hydra for my e99 f350. Today I went to pull the pcm and install the hydra, but when I pulled the pcm I found out that there was no sticker on the plastic peice that said the code. I've heard that you can get the code from the VIN somehow, but there's an issue with that as...
  3. [7.3L - Technical Info]
    For starters, I have a 1997 f350 7.3 powerstroke. 245xxx miles. 300/200 injectors, adrenaline gen 3 hpop, regulated efuel system w/ fass pump, etc. So as I was getting on the freeway the truck started running real choppy/shuddery and there was a sudden loss of power, and lots of smoke. Pulled...
  4. [7.3L - Technical Info]
    Getting ready to purchase my first diesel truck. The truck has 198k question is would I be good to mod her with that amount of mileage or should I look into a rebuild first. Only thing it has done now is exhaust. I would like to do intake, programmer, and new exhaust current is rotted. Than a...
  5. 1999-2010 Super Duty General Aftermarket
    All about my '99 Ford F350 SD . . . Jax' 1999 F350 7.3L Truck rebuild . . . . https://www.powerstrokenation.com/threads/jax-1999-f350-7-3l-truck-rebuild.569127/ The backup lights are not very bright in the truck, and a friend with a way newer truck than mine was raving about the DieselLeds.com...
  6. 1994-1997 Power Stroke Technical Info
    TLDR: the new bushings on my rear sway bar endlinks are being compressed at an extreme angle that seems incorrect to me...how flush/aligned with the sway bar eye should the faces of the bushings be? How can I correct that alignment? Sway bar bushing/mount positioning? End link length? Thanks in...
  7. 1990 F350 Crew Cab Dually Bagged

    1990 F350 Crew Cab Dually Bagged

    Completely stock body and mostly stock interior with exception of a '95 dash. 1988 Chevy dually front suspension. 1999 7.3l Powerstroke engine swap. The body has been dropped a total of about 25" from where it was sitting when I bought the truck. The rear suspension has a 4link with a Panhard...
  8. New To The Nation
    Hey guys my 7.3 99 icp sensor has oil in the plug, I ordered a new sensor from NAPA, specifically dorman brand. Wondering how the dorman brand is? Kinda worried causerim reading everyone is saying to buy oem or international
  9. General Questions & Discussion
    What does everyone use for fuel additives in there OBS 7.3L?? I use Hot Shots Extreme. Was wondering if there's any other additives that you guys swear by and have proven positive results?
  10. Suspension-Related Items
    (For sale $350) 2000 to 2004 Ford Super Duty F250, F350 and 2000-2005 Excursion 4X4 replacement spring perch, sway bar, and track bar / Sway Bar mount repair kit. Also fits F450 and F550 2 and 4 wheel drive trucks with leaf spring front end. The original spring perch and sway bar mount on the...
  11. F350

    F350

  12. Burried

    Burried

    Nice friend with a bigger truck pulled me here out of the way after unhooking trailer.
  13. Craven

    Craven

    truck was towed to where it is now.
  14. 95 F350

    95 F350

  15. The Beast

    The Beast

  16. The Beast

    The Beast

    96 F350 4x4 XLT 7.3 PSD 36,507 orig miles, Tymar intake, Banks intercooler, downpipe, guages, TW 4 position chip, c00nhunterjoe accumulator body mod, Ford 08 aluminum diff cover, Oil guage mod, Exhaust brake, Rhino liner, Durn cat done run off an I can't find it.
Top