Ford Power Stroke Nation banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-16 of 17 Results
  1. 1994-1997 Power Stroke Technical Info
    I bought this truck 3 years ago to fully restore. It has 153,xxx miles. '97 F350 Dually 2wd. I've changed many parts on it because of leaks/failures. Also, been adding a few upgrades for a little more power. The other day, I noticed my lift pump was leaking into the valley, so, being that I...
  2. 7.3L Power Stroke Technical Info
    Hey guys! I figured I’d post questions here since I was always **** canned and told to give up my truck to a better owner on ford-trucks.com. You know, though the previous owner Jerry rigged the whole truck. Anyways, our 2002 F350 7.3L is my husbands daily right now. When he was coming...
  3. 6.0L Power Stroke Technical Info
    Ok so this one might be a little long, also I want to preface by saying I am not a mechanic and have done all work so far in my driveway with a husky tool set and some other tools. I'm new here so bear with me. I have an 04 (mane. date 09/03 that's as specific as I have gotten) 6.0 F250 that I...
  4. 6.4L Power Stroke - Technical Info
    I have a 2008 that currently has an intermittent problem starting and when it does, sometimes doesn't respond to throttle. I have currently bled the fuel system, changed the fuel filters, changed the engine oil, wiggled wires and swore lots. Any ideas would be appreciated. I also purchased an...
  5. 7.3L Power Stroke Technical Info
    Been struggling with a truck a buddy and I are working on but this is what we got so far. We're currently restoring a 99 f350 we both bought and the previous owner left the truck sitting for a few years to the point where it wouldn't start. Once we got ahold of it we started troubleshooting and...
  6. 7.3L Power Stroke Technical Info
    I have a 2003 7.3, I was driving and it started to run rough so I pulled off and now, it’s having a crank No start problem. IPW is going over 4.0 when cranking RPM’s aren’t going over 300 I’m kinda new to owning a diesel just looking for help to get it running
  7. 1994-1997 Power Stroke Technical Info
    I have a 1995 f250 obviously with the 7.3. About two weeks ago I was driving down the road and it sounded like it dropped to four cylinders and then died. Hasn’t started since. First thing I did was check all fuses they were all good. Next was unplugging the icp sensor and it changed nothing...
  8. 6.0L Power Stroke Technical Info
    I have an 04 f250 that ran fine when parked then sat almost 1 month came back to start it cranked on it and it had a rough start (not uncommon with my truck) but it never started idling right, gave ut some fuel and it did better at higher rpms but the lower the rpms went the worse it ran. Then...
  9. 1994-1997 Power Stroke Technical Info
    So I have a 96 F250 extended cab dually conversion flatbed with side work bins. I keep having problems with no start It’s been back to my mechanic several times last time He replaced the IPR and injector o rings also he thinks oil is passing through the turbo?? that I may need a new one (truck...
  10. 6.0L Power Stroke Technical Info
    I’m working on a 2006 F350 with a 6.0 for someone else. I haven’t worked on the 6.0s before but I have a ton of experience with the 7.3s. Now for the details. History: (from what I was told) Truck has 268k Cranks but doesn’t even try to start I was told that the truck was running fine then just...
  11. 6.0L Power Stroke Technical Info
    Hey guys, I just have a few questions so I have a 2004 F2 50 extended cab long bed lariat powerstroke with a 6.0 L as of right now it is a crank no start but when I touch it with a spray of ether or starting fluid that is relatively safer for diesels it’ll fire right off and run perfectly fine...
  12. 7.3L Power Stroke Technical Info
    I'm still diagnosing a crank no start after 3 months... I bought the truck 4 months ago, it was running/idling rough and had very hard starts. I've been working on it since. It is a 1996 7.3 F250 4x4 Supercab, 318k miles, #4 injector recently replaced (3.5 months ago right before this extended...
  13. 6.0L Power Stroke Technical Info
    Hey guys looking for advice on my 06 f250 I have a definite HPO leak and I’m not sure what needs to be replaced as in standpipes/ dummy plugs or what. ICP sensor was just replaced about 600 miles ago now I have a crank no start and am only building about 100-180 psi of ICP. Thanks in advance!
  14. 7.3L Power Stroke Technical Info
    Hi all powerstroke helpers, Ive been having a crank no start issue for a week now and I have thrown a few parts at it (cps, ipr) both motorcraft parts, I want to mention it just randomly died quickly while pulling out of my driveway, I restarted it and it fired up then shut off about 30 seconds...
  15. 6.0L Power Stroke Technical Info
    My truck was in a wreck, but there was no engine damage I ran the truck about 5 months ago and let it sit to collect dust When I went to start it, I charged up the batteries and plugged it in to warm up It started after about a 4 second crank, YAY! then ran super rough, and died in less than 20...
  16. 7.3L Power Stroke Technical Info
    So last December my trans took a crap. The tq let go and it was a disaster. Finally sorted a trans and got her back on the road happy as ever. then one night leaving work it had a hard start which was strange as it has never had a hard start issue before. i proceeded to drive home and out of no...
1-16 of 17 Results
Top