Ford Power Stroke Nation banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. 11-16 6.7L Power Stroke Technical Info
    Hey guys, I have coolant leaking from behind my ac compressor. Appears to be coming from in between the timing cover and the block. There’s no coolant above it or in front by the water pumps. I’ve checked the crossover tube and freeze plug in the head. Only leaks when the truck is cold and seems...
  2. 1994-1997 Power Stroke Technical Info
    Well its 100F out today, so its a good as time as any for a coolant leak.. The airbox chaffed this hose, and it started dripping coolant out, not a lot, but enough where I was below the line on the coolant tank. Taped it up, drove home and on the way home lost the AC. Truck never actually...
  3. 6.0L Power Stroke Technical Info
    Hi guys, first post here. I have a 2005 F250 with the 6.0 powerstroke. Truck is loosing coolant at a fast rate with no visible leak even after pressure test. White smoke only on initial acceleration during cold start. Replaced oil cooler with OEM oil cooler and gaskets less than 1k miles ago...
  4. 7.3L Power Stroke Technical Info
    I originally posted this on another forum seeking advise. 54 views so far and not a single comment. Although I purchased my first 7.3 new back in 1995 and now this is my 6th 7.3 Powerstroke, I am still learning about these awesome engines. I'm not a diesel mechanic by trade, but as one who was...
  5. 7.3L Power Stroke Technical Info
    Hey power stroke people. I’m driving a 03 E350 converted school bus with a 7.3. Had my radiator cap blow off, water pump fail (leaking from weep hole), oil in the coolant, and coolant leaking fast from the back of the engine. Replaced the water pump in an auto one parking lot and camping out...
  6. 7.3L Power Stroke Technical Info
    I have a 2001 7.3 l with 232k miles with an down pipe and an edge programmer. A few months ago my truck would slightly hesitate at about 2,000 rpm going down the highway. i noticed my injector pressure would drop about 200-300 PSI. I didn't think it was a big deal as it never lost power. 2...
1-6 of 6 Results
Top