PowerStrokeNation : Ford Powerstroke Diesel Forum - View Profile: bismic1

bismic1 bismic1 is online now

"resident smarty pants"

  Visitor Messages

Showing Visitor Messages 1 to 3 of 3
  1. jspivak6.0
    06-27-2014 12:41 AM - permalink
    jspivak6.0
    I can't seem to tell. Kind of a goldish yellow color in the bottle but no evidence of oil. Deltas got above the 15 degree limit. Got up to 21*. A friend of mine suggested I try a flush first to see if it will fix anything. Not sure if it will but it's worth a shot. Would you recommend it?
  2. jspivak6.0
    06-25-2014 10:50 PM - permalink
    jspivak6.0
    Are there any other ways to tell if an oil cooler is bad besides the temperature deltas?
  3. massa2945
    01-17-2012 02:15 PM - permalink
    massa2945
    i never really said thank you for all the help you gave me you saved me a lot of money . ihope this will help you.this is a guy i buy and sell cores to he's a good guy if he can't help you, he can tell you who can his name is Juan Garcia his #is 832 298 4263. again man thanks, and i hope i can help.

  About Me

  • Signature
    Mark
    06 F250 CC SB FX4 Lariat;ARPs OEM gaskets;Banks exhaust;DynaTrac Balljoints;RACCCV6000;Updated HPOP fitting;JimmiJammers;Ravelco;plugs&standpipes;Fumo to;Harpooned;Quadzilla XZT Fuel Press;Blue spring;DashDAQ;PHP_FICM; RiffRaff boots;DCPower270A XP;Inverter;Rancho7000's;BPD EGR cooler;BPD WaterPump;SCT Matts SRL+;ELC Ultra w/ filter;SynchroMax

  Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: Today 11:13 AM
  • Join Date: 04-29-2008
  • Referrals: 3

  Friends

Showing Friends 1 to 2 of 2

  Mentions

02-18-2019
06:18 PM - Turd-250 mentioned bismic1 in post Re: Yo Bismick.
...r seen that before! bismic1 lol
10-03-2018
12:54 PM - Scherf mentioned bismic1 in post Re: Truck starts then loses ICP completely....
bismic1, finding a fummins t...
09-10-2018
02:34 PM - Turd-250 mentioned bismic1 in post Re: My 2005 6.0 dies at operating temperature
...g on the handle. bismic1 If you pull the ign...
09-04-2018
06:33 PM - bismic1 mentioned Turd-250 in post Re: Hard start when truck faces up hill
...is post is for you Turd-250)
08-29-2018
02:15 PM - Turd-250 mentioned bismic1 in post Re: 04 6.0 dies while running
... us can help. Tho, bismic1 is pretty sharp, he'...
07-31-2018
01:50 PM - bismic1 mentioned Mark Kovalsky in post Re: 05 6.0l auto to zf6 cruise control
...converstion.html Mark Kovalsky could probably tell ...
12:39 PM - Sbluke55 mentioned bismic1 in post 05 6.0l auto to zf6 cruise control
... in a little bit. bismic1 do you have any idea...
06-28-2018
09:19 PM - Ernie Boling mentioned bismic1 in post Re: SETX FNG Begins The Journey...
...ed on the advice of bismic1 I have added to my p...
05-20-2018
05:11 PM - Scherf mentioned bismic1 in post Re: Long Road, Hope its Coming to an End.
bismic1, Ya I have the wavy...
04-17-2018
09:11 PM - bismic1 mentioned Weatherlite in post Re: Oil in coolant
Well said Weatherlite
01-28-2018
12:35 AM - Turd-250 mentioned bismic1 in post Re: HELP PLEASE!
...s oneLet's wait til bismic1 or jamiesaun see tha...
12-13-2017
08:38 PM - bigbaby mentioned bismic1 in post Ipr hits 60 going up a hill then dies
bismic1 the glowshift guage ...
12-07-2017
04:26 PM - bigbaby mentioned bismic1 in post Ipr hits 60 going up a hill then dies
@turd 250 bismic1 & whomever else woul...
12-06-2017
06:11 PM - bigbaby mentioned bismic1 in post Ipr hits 60 going up a hill then dies
bismic1 so *I need to attac...
04:38 PM - bigbaby mentioned bismic1 in post Ipr hits 60 going up a hill then dies
...e and went to work bismic1 that Ford write up s...
11-29-2017
02:11 PM - Scherf mentioned bismic1 in post Re: May have some buyers regrets on my recent 6.0
bismic1, speaking of fans, h...
07-14-2017
10:29 AM - Turd-250 mentioned bismic1 in post Re: 03 6.0 psd dies and no start but cranks
...ing and no start. bismic1 you mind confirming?...
06-26-2017
04:02 AM - Scherf mentioned bismic1 in post Re: White Smoke, No Power.
bismic1, thanks for the head...
01-23-2017
12:57 PM - jamiesaun mentioned bismic1 in post Re: Not your typical crank no start
...wanna take this one bismic1?

  Quotes

04-15-2019
07:35 AM - bismic1 quoted Robertl211 in post Re: 2005 6.0 No Hot Start
Plugged in shop air to ICP fitt...
04-08-2019
09:40 PM - Scherf quoted bismic1 in post Re: Pressure and oil in degas bottle
...own bolt holes). Bismic1, how prominent are t...
04:23 PM - bismic1 quoted matthewd11 in post Re: Pressure and oil in degas bottle
Fuel in the coolant is more lik...
03:13 AM - bismic1 quoted ktspindler in post Re: 6.0 engine swap trouble
God this sucks.. to me it seems...
03-30-2019
02:15 PM - bismic1 quoted masakimm in post Re: Blankety blank neighbor... Antifreeze in oil..
Uhmm 18 gallon maybe 18 quart...
03-29-2019
02:27 PM - bismic1 quoted Tte531 in post Re: Another No Start '03 6.0
So the fact that it came in...
03-27-2019
12:23 PM - Weatherlite quoted bismic1 in post Re: Another No Start '03 6.0
It is easy to mess them up i...
03-25-2019
12:21 PM - Weatherlite quoted bismic1 in post Re: No start when hot !!
Your ICP sensor sounds "flak...
03-21-2019
10:41 PM - koukimonster quoted bismic1 in post Re: 6.4 trans pan upgrade question
You are correct on that part...
09:34 PM - bismic1 quoted koukimonster in post Re: 6.4 trans pan upgrade question
I actually think the correct part...
03-19-2019
08:01 PM - bismic1 quoted DIEDERRR in post Re: No start - Oil soaked IPR Valve?
I Pulled IPR and its covered ...
03-15-2019
01:30 AM - 207RIDER quoted bismic1 in post Re: not fueling 6.0?
Glad it is running ok now. ...
03-14-2019
11:52 PM - 207RIDER quoted bismic1 in post Re: not fueling 6.0?
An electrical glitch really ...
02:15 PM - 207RIDER quoted bismic1 in post Re: not fueling 6.0?
The GPCM can fail in a numbe...
11:11 AM - 207RIDER quoted bismic1 in post Re: not fueling 6.0?
I see that you have logged o...
03-13-2019
10:46 AM - 207RIDER quoted bismic1 in post Re: not fueling 6.0?
Since you have fuel pressure...
12:19 AM - 207RIDER quoted bismic1 in post Re: not fueling 6.0?
The 6.0 really needs 150 rpm...
03-12-2019
11:34 PM - 207RIDER quoted bismic1 in post Re: not fueling 6.0?
Post the code numbers. It h...
11:28 PM - 207RIDER quoted bismic1 in post Re: not fueling 6.0?
Post the code numbers. It h...
03-09-2019
03:23 AM - longjonsilver quoted bismic1 in post Re: 04 6.0 literally ZERO ICP
An HPOP from Ford is not wha...
 
For the best viewing experience please update your browser to Google Chrome