PowerStrokeNation : Ford Powerstroke Diesel Forum - View Profile: matthewd11

matthewd11 matthewd11 is offline

PSN Veteran

  Visitor Messages

Showing Visitor Messages 1 to 2 of 2
  1. Mysixfour
    12-28-2018 01:58 PM - permalink
    Mysixfour
    No but ima try to send you something. should be simple. remove the turbos and the cover underneath it. i did my turbos not too long ago. a lot easier with the egr coolers deleted. can be a paint to removed rear bolts with the egr cooler on the way. you will need gaskets and i would also install new bolts. i bought a long 3/8" flex head ratchet to make it easier for the rear bolts.
  2. bhuey85
    07-07-2018 06:39 PM - permalink
    bhuey85
    you Don't happen to have any cab on write ups for the oil cooler do you? I am tackling this job next weekend. thanks

  About Me

  • About matthewd11
    Location
    Rhode Island
    Occupation
    Auto/Truck Technician
  • Signature
    07 CCSB 4x4 Lariat FX4 Bronze Metallic/Sage

  Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: Today 02:04 PM
  • Join Date: 11-27-2007
  • Referrals: 1

  Mentions

06-12-2019
12:32 PM - Turd-250 mentioned matthewd11 in post Re: 6.0 questions
...e to say! edit: or matthewd11 up there, or jamies...
05-25-2018
11:34 PM - stanimal mentioned matthewd11 in post Name/troubleshoot this engine knock (video)
I think what matthewd11 is hinting at is the...

  Quotes

06-16-2019
02:47 AM - Goatwrangler quoted matthewd11 in post Looking to purchase a 6.4l powerstroke
I guess the bigger question is ...
06-15-2019
12:10 AM - Mr_Andy quoted matthewd11 in post Re: 6.4 blow by
That depends on the amount. Th...
06-06-2019
02:05 AM - Godzillamax69 quoted matthewd11 in post Re: Help diagnosing my 6.0!
Youíve most certainly got a cha...
05-28-2019
06:21 PM - Mr_Andy quoted matthewd11 in post Re: Really blew headgaskets
How much coolant was in the oil...
05-27-2019
05:10 PM - Weatherlite quoted matthewd11 in post Re: Randomly stalls and wont start for 20 mins
Check the IPR pigtail I would b...
05-09-2019
07:14 AM - koukimonster quoted matthewd11 in post Re: Is upgrading the 5R110 solenoids worth it?
Save your money itís a useless ...
05-05-2019
01:43 PM - flmeade quoted matthewd11 in post Re: Glow Plug Relay stoppped working
The pcm on my 2000 failed in th...
04-19-2019
11:30 PM - matthewd11 quoted Sbluke55 in post HELP!!!!!
You need to pull your glow pl...
04-16-2019
10:31 AM - Robertl211 quoted matthewd11 in post Re: 2005 6.0 No Hot Start
Do you know Paul Haberski? N...
04-08-2019
04:23 PM - bismic1 quoted matthewd11 in post Re: Pressure and oil in degas bottle
Fuel in the coolant is more lik...
01-19-2019
10:14 PM - foxracing6.7 quoted matthewd11 in post Re: Oil temp still high on 2016 6.7 after new oil cooler. Help. Thanks
Did you check the water pump? ...
10:11 PM - foxracing6.7 quoted matthewd11 in post Re: Oil temp still high on 2016 6.7 after new oil cooler. Help. Thanks
Did you check the water pump? ...
01-17-2019
01:43 AM - foxracing6.7 quoted matthewd11 in post Re: Oil temp still high on 2016 6.7 after new oil cooler. Help. Thanks
Try a different tune. You had ...
01-02-2019
12:12 AM - 79jasper quoted matthewd11 in post Re: Smoking on warmup, poor mpg
260k on original injectors?? D...
12-18-2018
01:55 PM - Scherf quoted matthewd11 in post Re: No start after head job
Does the ICP read zero with Koe...
12-17-2018
05:16 PM - Scherf quoted matthewd11 in post Re: No start after head job
Do you hear the injectors cycle...
03:29 PM - Scherf quoted matthewd11 in post Re: Odd deltas, looking for some ideas
I would start with a thermostat...
03:14 PM - matthewd11 quoted Fatpat42 in post 04 6.0 low boost in 1st gear
So you would consider 8-10 lb...
12-12-2018
01:29 AM - 96pwrstrk quoted matthewd11 in post Re: 7.3 using alot of oil, compression test decent
It’s possible the valve s...
12-02-2018
12:34 AM - heavydoc quoted matthewd11 in post Re: Overheat and Heater issue
If it was a water pump issue it...
 
For the best viewing experience please update your browser to Google Chrome