Re: 6.0 no start after new HPOP Ipr. Ipr wiring issue ??
Its does have the updated stand pipes. after doing some more test that. come to find out I must have fried my PCM
due to hooking an RC
car battery up to my IPR
wiring. the truck start up as soon as I jumped the IPR
with a 9v. I only let it out for a few second than as soon as I unhook the 9v the truck dies. I believe I mave have fried the pcm
i think you would have at least a code if that were the case. did you just use jumper wires on the harness? or did you hook right in to the valve itself?
do you have another pcm
from a buddy you could swap in? to try?
2009 CCSB Black
12.6 @ 109 1/4 mile