Ford Power Stroke Nation banner

parts needed for 1987 pickup

632 views 3 replies 3 participants last post by  AshleyHann 
#1 ·
i need an underhood wiring harness for a 87 pickup.
i realized the underhood on the 88 is different plug than wha tis on the 87 cab i got. prefer diesel harness but will take a gas harness if that is all that is available.
i would rather not use the 88 harness because i had a small fire under the dash years ago and had to replace quite a few wires.
 
#2 ·
Need to be more specific. 4.9 harness, 5.o harness, 5.8 harness, or 460 harness.
Especially the 460 it was called " hot fuel system", and was a real fun harness.

Depending what you need, I may have it
 
#3 ·
well, the cab i am using is 87 F150 351 auto trans.
but i am putting it on my 88 diesel with C-6 trans.
they said all wiring is still in the cab. but i never looked until the other day,
and realized the under hood wiring is not there.
and i cant go back for it, cause the truck was taken apart about 9 years ago.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top