Need wiring help please - PowerStrokeNation : Ford Powerstroke Diesel Forum
 
LinkBack Thread Tools Display Modes
post #1 of 6 (permalink) Old 07-11-2010, 08:42 PM Thread Starter
PSN Veteran
 
zilla68's Avatar
 
Join Date: Jan 2009
Location: Moore, Oklahoma
Posts: 1,557
Need wiring help please

pulling off the banks transcommand, and I have the wires all out of the connector, my question is:

On a 1996 f350 auto 4x4 does anyone have the pin wiring diagram for the connector that plugs into the passenger side of the tranny. I'm seeing 2 orange and a white, the orange seem to have a yellow stripe on them (yea both look the same) and the white has a yellow stripe. I just need to know which ones are in pin locations 1,11,12 I believe it is.
anyone have a diagram they can throw up for me?

thanks
chris

Chris

Moore, Oklahoma



1996 Ford F350 4x4 Crew Cab PSD
6637 tymar
285-75-16 BFG All Terrains/Weld Wheels
3:55 gears
Automatic with billet convertor, tugger and alto discs
New Gearhead Tunes:
1 heavy tow
2 stealth mode
3 tow/econ
4 street perf
5 all out
6 high idle
1.0 housing
exhaust
zilla68 is offline  
Sponsored Links
Advertisement
 
post #2 of 6 (permalink) Old 07-11-2010, 10:54 PM Thread Starter
PSN Veteran
 
zilla68's Avatar
 
Join Date: Jan 2009
Location: Moore, Oklahoma
Posts: 1,557
Re: Need wiring help please

I might have it figured out, if someone could confirm the pin schematic to verify I'm right.

this is looking at the plug head on with the release clip at the top.
pin 1 is bottom left-pin6 is bottom right

pin 1 - orange/yellow
pin 2- purple/red
pin 3- orange/yellow
pin 4- purple/yellow
pin 5- brown
pin 6- empty

pin 12 is top row left side pin 7 is top row right side

pin 7- orange/black
pin 8- gray/orange
pin 9- empty
pin 10- empty
pin 11- white/orange
pin 12- orange/yellow

Chris

Moore, Oklahoma



1996 Ford F350 4x4 Crew Cab PSD
6637 tymar
285-75-16 BFG All Terrains/Weld Wheels
3:55 gears
Automatic with billet convertor, tugger and alto discs
New Gearhead Tunes:
1 heavy tow
2 stealth mode
3 tow/econ
4 street perf
5 all out
6 high idle
1.0 housing
exhaust
zilla68 is offline  
post #3 of 6 (permalink) Old 07-12-2010, 02:06 AM
OEM Moderator
 
Tom S's Avatar
 
Join Date: Jul 2007
Location: Littleton, Colo
Posts: 9,381
Send a message via AIM to Tom S
Re: Need wiring help please

I got your PM. If you still need help let me known and I will crack out the books. I found some stuff with google but not sure if it is what you needed.

1996 F250 Powerstroke 4X4 AUTO
DP-Tuner F-6 chip live tuned, BTS Transmission, Garrett 38R Turbo, Swamps Injectors 150cc, electric fuel,
Banks Intercooler, Reflexxions Cowl Hood, 17 degree HPOP, 4" Stainless Magnaflow &
Aeroturbine exhaust, Aeroforce OBD Scan Gauge, Truxedo tonneau cover
Dana 60 Precision Metal Fab RSK and SD Springs
Tom S is offline  
 
post #4 of 6 (permalink) Old 07-12-2010, 02:18 AM Thread Starter
PSN Veteran
 
zilla68's Avatar
 
Join Date: Jan 2009
Location: Moore, Oklahoma
Posts: 1,557
Re: Need wiring help please

yes I still need help. I'm referring to the wiring harness that plugs in on the passenger side of the tranny, behind the heat shield. I need a wiring diagram of what wire goes in what hole on the harness plug.

thanks
chris

Chris

Moore, Oklahoma



1996 Ford F350 4x4 Crew Cab PSD
6637 tymar
285-75-16 BFG All Terrains/Weld Wheels
3:55 gears
Automatic with billet convertor, tugger and alto discs
New Gearhead Tunes:
1 heavy tow
2 stealth mode
3 tow/econ
4 street perf
5 all out
6 high idle
1.0 housing
exhaust
zilla68 is offline  
post #5 of 6 (permalink) Old 07-13-2010, 03:47 AM
PSN Veteran
 
Patrick Feeley's Avatar
 
Join Date: Mar 2008
Location: Tehachapi, CA
Posts: 2,808
Re: Need wiring help please

From the 1996 EVTM:

PM Me if it doesn't work. Cheers!

97 F250 SC 4x4, E4OD, 4.10 LS, Basically Stock, Relocated Block Heater Plug, Ext Trans Filter, Tru-Cool Max, I/C Mounted but not Plumbed

SOLD: 94 F350 CC DRW PSD, 5 Speed, 4.10 LS, SBC Con-O, Baldwin Filter, Tymar HPX Hose, 3 DP, Bilsteins, $12 AIC, Coolant Filter, Explorer O/H Console, Trans Temp, Boost, and Pyro, Pedestal Mod, Gutted EBPV

Last edited by Patrick Feeley; 07-13-2010 at 03:53 AM. Reason: Fixed image
Patrick Feeley is offline  
post #6 of 6 (permalink) Old 07-13-2010, 03:31 PM Thread Starter
PSN Veteran
 
zilla68's Avatar
 
Join Date: Jan 2009
Location: Moore, Oklahoma
Posts: 1,557
Re: Need wiring help please

that helps a TON man thanks, so I'd take it that pins 12 and 1 are the same and are connected somewhere in line because they are the same harness.

thanks again
chris

Chris

Moore, Oklahoma



1996 Ford F350 4x4 Crew Cab PSD
6637 tymar
285-75-16 BFG All Terrains/Weld Wheels
3:55 gears
Automatic with billet convertor, tugger and alto discs
New Gearhead Tunes:
1 heavy tow
2 stealth mode
3 tow/econ
4 street perf
5 all out
6 high idle
1.0 housing
exhaust
zilla68 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the PowerStrokeNation : Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome