DO IT YOURSELF TRANSMISSION COMPLETE FLUSH. WORKS ON ALL TRUCK TRANSMISSIONS. - PowerStrokeNation : Ford Powerstroke Diesel Forum
 
LinkBack Thread Tools Display Modes
post #1 of 3 (permalink) Old 02-21-2012, 02:17 AM Thread Starter
PSN Local
 
Join Date: Jan 2008
Location: Puyallup, wa
Posts: 390
DO IT YOURSELF TRANSMISSION COMPLETE FLUSH. WORKS ON ALL TRUCK TRANSMISSIONS.

Here is what we do at work EVERY day. First remove the pan and replace the internal filter. Reinstall the pan and fill the trans to full mark. Then you want to OVERFILL yes overfill the transmission by about three quarts. Put transmission dip stick backin before you start the truck. Remove the line going BACK into the tranny from the trans cooler. Make sure its the return line. Put the line in a bucket. Start the truck for about 10 seconds. See how much fluid you have in the bucket. and repeat fill and start until the fluid is clean.. DO NOT RUN THE TRANNY DRY. This is why you are overfilling it at first.. It wont hurt anything and cause no damage to the internals by doing it this way. If you refill and do this once or twice until the fluid comes out clean you have flushed the converter, and cooler, and radiator cooler. Reinstall the transmission line that you removed and check to make sure your transmission is at the proper level. Why pay a shop 250-300 to do their half ass flush when you do it this way its done CORRECTLY.


Run either transynd or amsoil atf.

2002 F350 DRW, 38r Turbo, Terminator T500, REG return fuel system, CTS Evo Custom tuned by Bill at Powerhungry Performance, bts converter, S&B intake, Snows Stage 3 Water/Meth. Mcculloch hids 6k.
toypuller is offline  
Sponsored Links
Advertisement
 
post #2 of 3 (permalink) Old 03-01-2012, 01:30 AM
PSN Local
 
Join Date: Sep 2007
Location: Cape Cod, MA
Posts: 143
Re: DO IT YOURSELF TRANSMISSION COMPLETE FLUSH. WORKS ON ALL TRUCK TRANSMISSIONS.

There is a sticky for this procedure ....

1999.5 F350 SuperCab, Auto, 4x4, 3.73, PHP tunes, PI Stallion, Tri-something-olator, Hutched/Harpooned, 6637, CCV, IAH delete, MBRP 4", Evans, 203 T-stat, Japanese drain valve, dyna-beads, 70K
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
two-rocks is offline  
post #3 of 3 (permalink) Old 03-01-2012, 03:32 PM
Former Ford Trans Engr.
 
Mark Kovalsky's Avatar
 
Join Date: Aug 2007
Location: SE Florida
Posts: 3,028
Re: DO IT YOURSELF TRANSMISSION COMPLETE FLUSH. WORKS ON ALL TRUCK TRANSMISSIONS.

https://powerstrokenation.com/forums/...ead.php?t=4338

Mark
Former Ford Automatic Transmission Engineer

“The good thing about science is that it's true whether or not you believe in it.” ― Neil deGrasse Tyson
Mark Kovalsky is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the PowerStrokeNation : Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome