Re: Trans, Transfer, and Diff Fluids
rear diff, just fill it up till its coming out the fill plug. i pulled my leaking pan and resealed it, and mine took about 3 1/2 quarts. royal purple 85/140? or close to that, with no friction modifier. "this is for a 10.5 sterling" not a d-80
mobil 1 is fine, ams, or Shaffer's. pick your poison, i'm just using dex-3/mercon dino in my ford.
Trans holds about 16 to 18 quarts when it is rebuilt i believe, or bone empty!
7 to 8 with just a pan change, and filter.
i would plan on 5 or 6 gallons so you will have some left over. and do the hoot method flush on the trans, otherwise you will just be mixing fluids. i just did the hoot on my dmax, and i used 5 gallons even. did a hoot on the ford a long time ago, used about the same. how many miles is on your trans?
i do not have a transfer case, or a ft diff on the ford, but usually you fill them till fluid is coming out the fill hole.
the ft diff should take 2 to 3 quarts. i think 75/90 is ok for the front. the t case, i really don't know, but my d max holds about 2 1/2 quarts.
02 dmax cc dually 4wd "miss piggy" tow bitch, afe pr7, magnaflow, Kennedy lift pump, dual rail mount filters, PPE tunes
00 f350 srw rc=6100lbs
ats comp housing,bdp 1.0 exhaust,afe pr7,4in turbo back magnaflow,hx cross,di regulated return,bbha,dp hi,40,80e,120r,6.oh no cooler autometer gauges, dual rail mount filters
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.