Re: fuel regulator screen
OK on the driver side of the fuel bowl is the FPR. There are two 10mm bolts that secure it to the bowl. They are different lengths. Remove those two bolts and GENTLY pull the fpr away from the bowl. The screen is tiny and easily lost so pay attention. They can not be bought separately. Take a q-tip and clean both sides of the screen. If it has never been cleaned before you may need to remove it and while holding it tightly in your fingers spray it on both sides with carb cleaner or brake clean to clear any debris from the screen. Reassemble in reverse order.
97 F-350 XLT CC DRW 4X4 PSD, 285/75-16 Custom bumpers, Gauges-boost/egt/trans, Swamps IDM, 3.5"dp- 4" exh., 3" Body lift, ES bushings/mounts, Built trans, billet conv, B&M pan, Hayden cooler, Adrenaline, stage 2's, IC, H2E, E-fuel
ARP's, 910's, Smith Bros. to come