So if I am reading this right you used to be able to bump start it when it stalled but now it won't bump start and you have to cycle the ignition in order to start it back up? This could be a few things based on your statement that you get on it a little and let off and it dies. do you have access to a high end scanner to check for codes? You could have a bad IPR
sensor or bad o-rings on the sensor. You could also have as stated above a bad CPS
. Does it only do this if you only get in it a little and let off or does it do this with stop and go traffic as well or when coming to a stop from highway driving? I think we are gonna need a little more info to narrow down the cause.
97 F-350 XLT CC DRW 4X4 PSD, 285/75-16 Custom bumpers, Gauges-boost/egt/trans, Swamps IDM, 3.5"dp- 4" exh., 3" Body lift, ES bushings/mounts, Built trans, billet conv, B&M pan, Hayden cooler, Adrenaline, stage 2's, IC, H2E, E-fuel
ARP's, 910's, Smith Bros. to come