have intermittent no start no smoke issue.
Truck -96 240k miles 7.3 powerstroke E4OD
, stock except air filter.
New, starter, new batteries, New IPR
, new fuel filter, new cps
(grey) good Glow Plugs.
when no start there is 0 icp
, no change when unhook ICP
sensor and no smoke out the tailpipe. When it does start it drives perfect. and good pressure on both IPR
and idle. I
have a Scan Gauge II as a monitor
pass injector buzz test. no codes either.
How much should the tach move when crank? This "No start no smoke" doesent seem to occur when i recently started the truck. Outside temp does not matter
Edit: I have Torque app and car gauge pro. What values/pids am i gonna look at for best troubloeshooting?
The truck has had this problem for over a month. Doesent matter if it sits 3 weeks or 1 day. Never stalled out while running.
Took this pic while crank with no start.
From my torque app.
Skickat från min SM-G960F via Tapatalk