97 f250 hd 7.3. 415k truck starts & few seconds later cel comes on& runs ruogh
Hey yall..otherday my truck was running while i loaded brush on trailer..it started sounding funny & cel was on & sounded like running out of fuel..& then would level out& cel would cut off..but then come back on..i have checked all fuses..changed cps..& new uvc harness& gasket on passenger side..it is still acting up..i would have to have it towed to next town over to get codes read..so any help will be appreciated ..thank yall
Re: 97 f250 hd 7.3. 415k truck starts & few seconds later cel comes on& runs ruogh
if you have a smart phone, laptop, or tablet, you can download torque pro or forscan for under $5 each.
i do not like forscan, i can not get it to work. but others swear by it.
with an ELM adapter or a computer to OBD port connector you can do all kinds of things.
pretty much a must have tool these days as it will save you money instead of paying to have codes read every time.
owner of almost to many fords.
If you want the moral high ground, make sure you're not standing on a hill of horsecrap.
My codes wouldnt read with freinds scanner..but i told him bout tps problem few weeks ago. I cleaned connectors & was working fine.till 2 days ago.so i was told to replace tps..i did & now i get no throttle response at all .am i missing something in the instalation?
Yes sirs i asked freind 1st if able to read my truck he owns a 18 wheeler repair shop..but no go..
I tried a tps at hisadvice put 2 different tps on ..dead pedal..put origanal back on trucks been running 30 mins no problem no cel..fingers crossed my truck healed itself