I know there has already been topics started on this, but my 1996 f350 4x4 is not engaging into four wheel drive, and it has automatic locking hubs. This past weekend I had a friend that was stuck call me to come pull him out, and I put it in 4 low and ended up getting stuck because the front wheels had no power, tried rolling back and forth and still not power in the front, I am thinking it's the auto hubs, but just wanted to make sure before I order a set of warn manual hubs.
1997 CCSB, 7.3/E4OD
KC TP38R, CNC Fab Bellowed Up-Pipes, Full Force Stg 1 injectors, 3" DP, 4" exhaust, CNC Fab HPOP, Mark F E-Fuel, 7.3 Intercooler, 1.0 Exhaust Housing, TS Chip, remote coolant filter, and VB.
It's the lever and yes lights come on, 4x4 and when in 4 low the "low range" light comes on, also I thought maybe transfer case, but when in 4x4 I made sure the front drive shaft wasnt turning, so tried to turn it and it wasn't so it is going into 4x4 and it's not the transfer case which is why I thought it has to be the Hubs