Turbo to Y-pipe "O" ring - PowerStrokeNation : Ford Powerstroke Diesel Forum
 
LinkBack Thread Tools Display Modes
post #1 of 9 (permalink) Old 06-06-2009, 03:52 AM Thread Starter
<---F350 DRIFTER
 
drwoodchopper's Avatar
 
Join Date: Mar 2009
Location: Utah elevation 5800ft
Posts: 516
Turbo to Y-pipe "O" ring

Anyone know where to get one beside the stealership??? I must have torn mine today reassembling after I blew an intercooler hose off. I sealed with hi-temp rtv but I doubt that will hold 25lbs well.
Thanks

97
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
PSD. CC 4X4 195K, IDM mod, 6 Leaker IC, DP Tuner 6pos chip, WOP QSSB Turbo, kit by Carson Stauffer. Swamps 175/146's sticks, CNG kit 35mpg's on the diesel, E-fuel, Adrenaline and converted to a ZF5. RSK rolling on 35's. 4" straight pipe. 2011 f350 ccsb leveled on 35's, I can neither confirm nor deny that it is tuned and deleted!
drwoodchopper is offline  
Sponsored Links
Advertisement
 
post #2 of 9 (permalink) Old 06-06-2009, 04:20 AM
Don't EFN worry about it
 
Aljay's Avatar
 
Join Date: Jul 2007
Location: Fort Worth TEXAS Damn it !!
Posts: 15,588
Re: Turbo to Y-pipe "O" ring

Try a hyd. shop and get a square cut "O" ring .

97 crew cab shorty-4x4 Lots of mods .
Tuned by T Wildman
Aljay is offline  
post #3 of 9 (permalink) Old 06-06-2009, 05:20 AM
Kid with a Wrench
 
AlaskaRedneK's Avatar
 
Join Date: Sep 2007
Location: Wasilla, AK
Posts: 436
Send a message via MSN to AlaskaRedneK
Re: Turbo to Y-pipe "O" ring

Quote:
Originally Posted by drwoodchopper View Post
Anyone know where to get one beside the stealership??? I must have torn mine today reassembling after I blew an intercooler hose off. I sealed with hi-temp rtv but I doubt that will hold 25lbs well.
Thanks

Aww man. I have a new spare back home that Id of mailed you, but wont be there for a couple months.

I used to break mine all the time, got them from the IH dealership and Powerstrokeshop.com

Good Luck,
-Matt

'97 F-350 CC/LB 7.3L PSD 4x4 4.10's, Fresh Engine, Stacks, 7 Gauges, AFE, e-fan, BIG Kustom fuel system, 250cc
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Hybrids w/ 100%s, H2E, 3" intakes, Bad Boy
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Tranny built by me, ARPs, 910s, P-rods, 17*, SD IC


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
AlaskaRedneK is offline  
 
post #4 of 9 (permalink) Old 06-06-2009, 05:54 AM
PSN Local
 
Join Date: Jul 2007
Location: Igo, Northern Calif
Posts: 153
Re: Turbo to Y-pipe "O" ring

If you don't want to go to Ford,The Int part # 1818372C1 for the o-ring.

1997 F250 XLT CC 4X4 PSD E4OD 4.10LS (AB CALI TRUCK)
INTAKE
18K MOD
4"TURBO BACK DE EXHAUST
1705 SUPERCHIP
2" LEVELING
GAUGES
SONNAX VALVE WITH SPRINGS
TRANS COOLER
SWAMPS IDM

1996 F250 XLT EC 4X4 PSD E4OD 4.10LS
1705 SUPERCHIP
QUAD POD from Complete Performace
BD EXH BRAKE
3" DOWN PIPE
TRANS COOLER
DIY INTAKE
120v IDM
ono_55 is offline  
post #5 of 9 (permalink) Old 06-07-2009, 12:22 AM Thread Starter
<---F350 DRIFTER
 
drwoodchopper's Avatar
 
Join Date: Mar 2009
Location: Utah elevation 5800ft
Posts: 516
Re: Turbo to Y-pipe "O" ring

Thanks I have an iternational dealer next to work.

97
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
PSD. CC 4X4 195K, IDM mod, 6 Leaker IC, DP Tuner 6pos chip, WOP QSSB Turbo, kit by Carson Stauffer. Swamps 175/146's sticks, CNG kit 35mpg's on the diesel, E-fuel, Adrenaline and converted to a ZF5. RSK rolling on 35's. 4" straight pipe. 2011 f350 ccsb leveled on 35's, I can neither confirm nor deny that it is tuned and deleted!
drwoodchopper is offline  
post #6 of 9 (permalink) Old 11-27-2012, 07:39 PM
PSN Local
 
Join Date: Nov 2012
Posts: 62
Re: Turbo to Y-pipe "O" ring

Don't mean to bring this thread back to life, but where are the y pipes that have this o-ring? Think mines leaking too. Just got the truck do idk too much about it. Thanks
Lifted250 is offline  
post #7 of 9 (permalink) Old 11-27-2012, 07:45 PM
csp
PSN Veteran
 
Join Date: Apr 2009
Location: Parker, CO
Posts: 3,563
Re: Turbo to Y-pipe "O" ring

This sealing ring is at the outlet of the turbo. The y-pipe is what splits the boosted air charge to each bank of cylinders.
csp is offline  
post #8 of 9 (permalink) Old 11-27-2012, 10:14 PM
PSN Local
 
Join Date: Nov 2012
Posts: 62
Re: Turbo to Y-pipe "O" ring

Ok thanks
Lifted250 is offline  
post #9 of 9 (permalink) Old 11-28-2012, 07:31 PM
PSN Local
 
Rollncoal7.3's Avatar
 
Join Date: Sep 2012
Location: Greenville, michigan
Posts: 259
Re: Turbo to Y-pipe "O" ring

There cheap , i keep a few on hand.
Rollncoal7.3 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the PowerStrokeNation : Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome