Ok so I have a 95 cc dually 7.3 diesel that starts up and idles fine sounds good. When I put into drive or even in neutral or park it won't rev passed 1200RPM? I just replaced the IPR, CPS 3 times and oil, oil filter, no leaks anywhere IDM also replaced with 2 known good ones? Does anyone know what this could be? Is it something db I overlooking? Thanks for the help
Ok where should I measure the voltage from on the tps, which wires..
I will check that tomorrow if this snow holds off and I will replace the fuel filter with a new one... Let me know thanks
Key on engine off for the tps test?
I checked the wires and I am getting 5v but doesn't the check have to be after the tps? Bc testing tue wires before the tps is jus telling me its getting what it wants to the tps how do I verify if its working??? Here is a video check it out and let me know...