Re: Headlight Problem
The stock headlight sockets should have just plugged into the module for the plow system. Once you removed the module the factory sockets should work unless the plow system was of an older design where you had to wire in a DPST switch in the cab in order to switch power from the factory headlights to the plow lights. If so look for a switch mounted on the dash or possibly under it.
97 F-350 XLT CC DRW 4X4 PSD, 285/75-16 Custom bumpers, Gauges-boost/egt/trans, Swamps IDM, 3.5"dp- 4" exh., 3" Body lift, ES bushings/mounts, Built trans, billet conv, B&M pan, Hayden cooler, Adrenaline, stage 2's, IC, H2E, E-fuel
ARP's, 910's, Smith Bros. to come