dana 60 death wobble!!! - PowerStrokeNation : Ford Powerstroke Diesel Forum
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 29 (permalink) Old 09-27-2012, 08:22 PM Thread Starter
Powerstroke n00b
 
Justincredible's Avatar
 
Join Date: Feb 2012
Location: Union, Illinois
Posts: 448
dana 60 death wobble!!!

so i did a d60 swap. drove it for 2 days was fine, was on my way downtown and bam...got a hell of a death wobble that through me out of my seat at 65 miles an hour. and i cant figure out what would cause this.

1997 F-250 zf6, t-500 Hpop, Baby swamps, Beans D66 w/ 1.0, hydra, 6637 CAI, 6" exhaust. Kingpin D60
Boost, Oil pressure, HPOP Pressure, Water temp, Oil temp, Trans temp and EGT, fuel pressure


soon efuel and 3" plenums and intercooler.
Justincredible is offline  
Sponsored Links
Advertisement
 
post #2 of 29 (permalink) Old 09-27-2012, 09:18 PM
PSN Veteran
 
rusty1161's Avatar
 
Join Date: Dec 2007
Location: Whittier, CA
Posts: 998
Re: dana 60 death wobble!!!

Have you checked all of the bolts and nuts to see if they loosened? Specifically the track bar.

Rusty

1997 F250 CC/SB 7.3 PSD 4X4 XLT, 248,000 miles
rusty1161 is offline  
post #3 of 29 (permalink) Old 09-27-2012, 10:45 PM Thread Starter
Powerstroke n00b
 
Justincredible's Avatar
 
Join Date: Feb 2012
Location: Union, Illinois
Posts: 448
Re: dana 60 death wobble!!!

all tightened up...

1997 F-250 zf6, t-500 Hpop, Baby swamps, Beans D66 w/ 1.0, hydra, 6637 CAI, 6" exhaust. Kingpin D60
Boost, Oil pressure, HPOP Pressure, Water temp, Oil temp, Trans temp and EGT, fuel pressure


soon efuel and 3" plenums and intercooler.
Justincredible is offline  
 
post #4 of 29 (permalink) Old 09-27-2012, 11:10 PM
michael5126
 
Michael5126's Avatar
 
Join Date: Sep 2011
Location: On the Gulf Coast in Louisiana
Posts: 103
Re: dana 60 death wobble!!!

King pin or ball joint style?
Michael5126 is offline  
post #5 of 29 (permalink) Old 09-27-2012, 11:20 PM
PSN Veteran
 
rusty1161's Avatar
 
Join Date: Dec 2007
Location: Whittier, CA
Posts: 998
Re: dana 60 death wobble!!!

Quote:
Originally Posted by Justincredible View Post
all tightened up...
How are the trackbar bushings?

Rusty

1997 F250 CC/SB 7.3 PSD 4X4 XLT, 248,000 miles
rusty1161 is offline  
post #6 of 29 (permalink) Old 09-28-2012, 12:03 AM Thread Starter
Powerstroke n00b
 
Justincredible's Avatar
 
Join Date: Feb 2012
Location: Union, Illinois
Posts: 448
Re: dana 60 death wobble!!!

king pin axle out of an 86 f350. and the bushings seem to be ok.

1997 F-250 zf6, t-500 Hpop, Baby swamps, Beans D66 w/ 1.0, hydra, 6637 CAI, 6" exhaust. Kingpin D60
Boost, Oil pressure, HPOP Pressure, Water temp, Oil temp, Trans temp and EGT, fuel pressure


soon efuel and 3" plenums and intercooler.
Justincredible is offline  
post #7 of 29 (permalink) Old 09-28-2012, 01:13 AM
PSN Veteran
 
gnxtc2's Avatar
 
Join Date: Oct 2008
Location: Bergen County, NJ USA
Posts: 2,761
Re: dana 60 death wobble!!!

Do you have the trac bar?

Billy T.
[email protected]

'97 Black F250HD SC 3.55s, Punisher trans, PI Converter, Dana 60 RSK w/ V & C SD springs,
PIS 175/80s, HB Jr, Comp910s, Smith Bros PRs, ARPs, Fluidampr, IC, E-Fuel, CJC Traction blocks, HFHV IDM, T4/BASB, 262K

Other vehicles
-1987 Buick Grand National (Staged)
-2004 Mercury Marauder
-1993 Geo Prizm (beater)
-2016 F350 DRW Utlimate
gnxtc2 is offline  
post #8 of 29 (permalink) Old 09-28-2012, 01:35 AM Thread Starter
Powerstroke n00b
 
Justincredible's Avatar
 
Join Date: Feb 2012
Location: Union, Illinois
Posts: 448
Re: dana 60 death wobble!!!

Yeah i have the trac bar... Drove fine for 2 daya then all of a sudden bam death!

1997 F-250 zf6, t-500 Hpop, Baby swamps, Beans D66 w/ 1.0, hydra, 6637 CAI, 6" exhaust. Kingpin D60
Boost, Oil pressure, HPOP Pressure, Water temp, Oil temp, Trans temp and EGT, fuel pressure


soon efuel and 3" plenums and intercooler.
Justincredible is offline  
post #9 of 29 (permalink) Old 09-28-2012, 02:09 AM
STILL LEARNING
 
Bradbilt's Avatar
 
Join Date: Oct 2008
Location: Gilbert PA
Posts: 18,317
Re: dana 60 death wobble!!!

What springs are you running and how are your shackle/spring bushings?

Looking for Blue 40-20-40 seat for OBS. PM me if any known
Bradbilt is offline  
post #10 of 29 (permalink) Old 09-28-2012, 03:55 AM Thread Starter
Powerstroke n00b
 
Justincredible's Avatar
 
Join Date: Feb 2012
Location: Union, Illinois
Posts: 448
Re: dana 60 death wobble!!!

they look ok, and im running the f350 springs.

1997 F-250 zf6, t-500 Hpop, Baby swamps, Beans D66 w/ 1.0, hydra, 6637 CAI, 6" exhaust. Kingpin D60
Boost, Oil pressure, HPOP Pressure, Water temp, Oil temp, Trans temp and EGT, fuel pressure


soon efuel and 3" plenums and intercooler.
Justincredible is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the PowerStrokeNation : Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome