Pedal Assembly - PowerStrokeNation : Ford Powerstroke Diesel Forum
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 12 (permalink) Old 10-15-2011, 12:50 AM Thread Starter
PSN Local
 
Join Date: Jan 2010
Posts: 342
Pedal Assembly

I need a pedal assembly for my 94 F350 clutch,brake,acclerator where can i order one and if yall can help me out with a part number thanks.
03F250 6.0 is offline  
Sponsored Links
Advertisement
 
post #2 of 12 (permalink) Old 10-15-2011, 01:09 AM
PSN Veteran
 
Join Date: Nov 2007
Location: Kamloops, BC. Canada
Posts: 3,325
Re: Pedal Assembly

Check out here https://powerstrokenation.com/forums/...ad.php?t=27529

Should be listed in there (alphabetically) and is found in the Tech library 94-97 up top.

In terms of getting the parts I'd check out your local wreckers for the best prices, is this for a 7.3 litre powerstroke equipped truck?

jrc

Tan white tan 97 ECLB, D60 PMF, RSK SD springs front, airs bags rear, 4:10s 37” Toyo R/Ts intake, FFD 205/30s, DP 4” exhaust DIY E-fuel, ZF-5 now
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
lights: VisionX & HID projectors in headlights.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

2012 VW Touareg TDi Rawtek exhaust Malone tuned.
JCart is offline  
post #3 of 12 (permalink) Old 10-15-2011, 01:49 AM
PSN Veteran
 
Join Date: Aug 2008
Location: Madison, WI
Posts: 5,373
Re: Pedal Assembly

Clutch and brake pedals come as an assembly. Go-pedal is just a big volume control, and NOT cheap. Why do you need all three?
madpogue is offline  
 
post #4 of 12 (permalink) Old 10-15-2011, 07:10 AM Thread Starter
PSN Local
 
Join Date: Jan 2010
Posts: 342
Re: Pedal Assembly

ok no i taught they all came together, the whole assembly is completely worn out thats why iam in need of replacing them, and yes it is equipped with the 7.3
03F250 6.0 is offline  
post #5 of 12 (permalink) Old 10-15-2011, 11:40 AM
PSN Local
 
Join Date: Dec 2010
Location: Byron,NY
Posts: 63
Re: Pedal Assembly

Tear it apart and rebuild it. New bushings and Heim joint mod.

97F250, EC LB 4x4 7.3 5sp 3:55,Donaldson Intake, Running W75/12.5/12.5 as of 2/20/12
Mudbrother is offline  
post #6 of 12 (permalink) Old 10-15-2011, 07:45 PM
BrokeAss
 
Join Date: Jan 2011
Location: Pennsylvania
Posts: 841
Re: Pedal Assembly

Quote:
Originally Posted by Mudbrother View Post
Tear it apart and rebuild it. New bushings and Heim joint mod.
What he said.
LMC has all the parts you will need to replace. The only expensive part is the assembly itself, and if you are doing this repair before it is too bad then you won't need that anyway.
Russo2 is offline  
post #7 of 12 (permalink) Old 10-16-2011, 03:31 AM
PSN Veteran
 
Join Date: Nov 2007
Location: Kamloops, BC. Canada
Posts: 3,325
Re: Pedal Assembly

Yes you can get a rebuild bushing kit for the peddle assembly from ford and should be listed in the above parts list.

jrc

Tan white tan 97 ECLB, D60 PMF, RSK SD springs front, airs bags rear, 4:10s 37” Toyo R/Ts intake, FFD 205/30s, DP 4” exhaust DIY E-fuel, ZF-5 now
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
lights: VisionX & HID projectors in headlights.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

2012 VW Touareg TDi Rawtek exhaust Malone tuned.
JCart is offline  
post #8 of 12 (permalink) Old 10-16-2011, 06:12 AM Thread Starter
PSN Local
 
Join Date: Jan 2010
Posts: 342
Re: Pedal Assembly

Ok thanks guys the pedal assembly runs $210 so repairing cant be as much I think
03F250 6.0 is offline  
post #9 of 12 (permalink) Old 10-16-2011, 08:51 PM
PSN Veteran
 
Join Date: Nov 2007
Location: Kamloops, BC. Canada
Posts: 3,325
Re: Pedal Assembly

Yes it's easy to replace the bushings in the peddle box. Just rebuilt mine earlier this summer (had the kit for ages so don't have P/N sorry). Also while you have it apart get one of these


7/16" drill bit stop and put it on the end of the clutch peddle assembly to hold the clutch rod (that connects to master cylinder). You might have to trim the retainer tabs on the black nylon bushing to give clearance for the bit stop...works awesome.

jrc

Tan white tan 97 ECLB, D60 PMF, RSK SD springs front, airs bags rear, 4:10s 37” Toyo R/Ts intake, FFD 205/30s, DP 4” exhaust DIY E-fuel, ZF-5 now
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
lights: VisionX & HID projectors in headlights.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

2012 VW Touareg TDi Rawtek exhaust Malone tuned.
JCart is offline  
post #10 of 12 (permalink) Old 10-17-2011, 12:53 AM
BrokeAss
 
Join Date: Jan 2011
Location: Pennsylvania
Posts: 841
Re: Pedal Assembly

I would do the heim joint over what jrc said, but to each his own.
Russo2 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the PowerStrokeNation : Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome