Need some help with stacks - PowerStrokeNation : Ford Powerstroke Diesel Forum
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 21 (permalink) Old 03-28-2010, 08:37 PM Thread Starter
Sponsor
 
04stroker's Avatar
 
Join Date: Jul 2009
Location: Snowshoe, west virginia
Posts: 1,984
Need some help with stacks

I got two 8 inch stacks only 1 is installed I'm looking for and having a hard time finding 2 90's and a T in 5" stainless steel anybody know where I can get this at a decent price?

HOLDERS DIESEL PERFORMANCE
Building and flowing 6.0 injectors in house
holdersdiesel.com
04stroker is offline  
Sponsored Links
Advertisement
 
post #2 of 21 (permalink) Old 03-28-2010, 08:55 PM
<-MONEY PITT!!
 
ifitssmokinitsstrokin's Avatar
 
Join Date: Sep 2008
Location: Wyoming
Posts: 1,308
Re: Need some help with stacks

You will have to use 90s and a piece of strait to get the 90s as close to the in side of the box as possible unless u want them sitting closer to each other and i dont think u can t right in the middle of the box because of the gas tank IIRC when i did my stacks that was a issue!! I dont think and vendors on here carry just bends...but mandrel bends should have them thats were i got all the parts to build my headers and turbo kit for my 62 nova my down pipe was 5" off the s488 so i made a DP from bends that i got there.

2010 CCSB Afe Intake and dual exhaust
2006 CCLB F-250 Studs,Squeez,EGR delete,RR to AirDog II and a Airraid Intake & Sct Hot tunes *SOLD*
1963 Chevy Nova II 88mm turbo 408 LSX backhalved and tubbed 9.22 @ 145 @ 5000ft BUILT NOT BOUGHT!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

02 Cummins ECSB 5 spd,250s,edge comp 64 over a s475.. Work Truck
ifitssmokinitsstrokin is offline  
post #3 of 21 (permalink) Old 03-28-2010, 09:09 PM
PSN Local
 
Join Date: Oct 2009
Location: Rainier OR
Posts: 210
Re: Need some help with stacks

try a big rig shop
sissy is offline  
 
post #4 of 21 (permalink) Old 03-28-2010, 10:15 PM
Still learning
 
bad moose's Avatar
 
Join Date: Dec 2009
Location: Valley Center, KS
Posts: 368
Re: Need some help with stacks

Quote:
Originally Posted by sissy View Post
try a big rig shop
X2!!!

03 F250 King Ranch
SCT tuned by Eric @ Innovative, Exhaust, and Air Raid filter
EGR Deleted
Still to slow
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
bad moose is offline  
post #5 of 21 (permalink) Old 03-28-2010, 10:24 PM
<-MONEY PITT!!
 
ifitssmokinitsstrokin's Avatar
 
Join Date: Sep 2008
Location: Wyoming
Posts: 1,308
Re: Need some help with stacks

I tried alot of big rig shops when i did my setup they had 90s butthey were very over priced and all the ts they had were angled no a regular t But maybe you will have better luck!

2010 CCSB Afe Intake and dual exhaust
2006 CCLB F-250 Studs,Squeez,EGR delete,RR to AirDog II and a Airraid Intake & Sct Hot tunes *SOLD*
1963 Chevy Nova II 88mm turbo 408 LSX backhalved and tubbed 9.22 @ 145 @ 5000ft BUILT NOT BOUGHT!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

02 Cummins ECSB 5 spd,250s,edge comp 64 over a s475.. Work Truck
ifitssmokinitsstrokin is offline  
post #6 of 21 (permalink) Old 03-28-2010, 10:27 PM Thread Starter
Sponsor
 
04stroker's Avatar
 
Join Date: Jul 2009
Location: Snowshoe, west virginia
Posts: 1,984
Re: Need some help with stacks

I have enough straight to do it but I checked big rig shops they were all over priced and big sweeping 90's how do I get in touch with this mandrel bends? They have a website?

HOLDERS DIESEL PERFORMANCE
Building and flowing 6.0 injectors in house
holdersdiesel.com
04stroker is offline  
post #7 of 21 (permalink) Old 03-28-2010, 10:41 PM
<-MONEY PITT!!
 
ifitssmokinitsstrokin's Avatar
 
Join Date: Sep 2008
Location: Wyoming
Posts: 1,308
Re: Need some help with stacks

Ya They do...But come to think of it i got my stuff from race parts solutions because it was a little cheaper!!Mandrel Bent Pipes & Accessories, Stainless Steel | RacePartSolutions.com stainless 5" is gonna be pricey tho Mild steel is much cheaper!!!

2010 CCSB Afe Intake and dual exhaust
2006 CCLB F-250 Studs,Squeez,EGR delete,RR to AirDog II and a Airraid Intake & Sct Hot tunes *SOLD*
1963 Chevy Nova II 88mm turbo 408 LSX backhalved and tubbed 9.22 @ 145 @ 5000ft BUILT NOT BOUGHT!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

02 Cummins ECSB 5 spd,250s,edge comp 64 over a s475.. Work Truck
ifitssmokinitsstrokin is offline  
post #8 of 21 (permalink) Old 03-28-2010, 10:59 PM
I like turtles
 
NE-STROKE's Avatar
 
Join Date: Nov 2009
Location: omaha Ne
Posts: 2,604
Re: Need some help with stacks

I know napa sells 5 inch elbows in galvinized.

08 duramax ccsb efi live, air dog 2, isspros, 5 inch exhaust and some other cool things. 2001 duramax 2wd (Project truck)
Once had a signature that had some bad ass stuff on it. Now its back to crap.
NE-STROKE is offline  
post #9 of 21 (permalink) Old 03-28-2010, 11:09 PM
<---new toy
 
DPS0925's Avatar
 
Join Date: Jan 2010
Location: Southeast Texas
Posts: 856
Re: Need some help with stacks

I have done a lot of exhaust on big trucks. 1# they make a short 90, and they make a long 90. they both come in ss and aluminumized. flex pipe CAN be your friend! 2# you can take two 90's to any GOOD muffler shop and they can cut them in two and weld up you a 90. any questions PM me. Dave


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
DPS0925 is offline  
post #10 of 21 (permalink) Old 03-29-2010, 12:14 AM
Sponsor
 
dalpilot's Avatar
 
Join Date: Jul 2007
Posts: 3,297
Re: Need some help with stacks

WHy would you need to make a 90 out of two 90's?


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
dalpilot is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the PowerStrokeNation : Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome